Three-quarter view of a cleanroom air shower infrared presence sensor

クリーンルーム機器のスペアパーツ

Air シャワーの赤外線センサー

A compact photoelectric sensor that detects entry or occupancy signals for automatic air shower cycle and door-control logic.

Non-Contact Detection
Compact Black Housing
Visible Status Indicator
Secure Two-Ear Mounting

見積もりリクエスト製品案内

商品紹介

The air shower infrared sensor provides a non-contact presence signal to the sequence controller when a person or material load enters the sensing zone. A dark optical window shields the emitter and receiver components, while the status LED supports alignment and service checks. Side mounting ears hold the sensing face in a repeatable position inside the chamber. Replacement compatibility depends on sensing principle, supply voltage, output logic, connector arrangement and required detection distance.

主要な特徴

Non-contact detection avoids switches that require physical actuation.

A tinted optical window protects the sensing elements from routine chamber cleaning.

The visible indicator provides immediate confirmation of detection status.

Twin metal mounting ears support stable alignment on the air-shower panel.

お客様の製品に関する懸念事項

Reliable cycle triggering requires a sensor that matches the controller input and remains correctly aimed in the chamber.

A narrow or misaligned detection zone fails to register chamber entry.Twin mounting ears provide repeatable positioning toward the intended sensing area.

An incompatible output signal cannot trigger the existing controller.Output logic and supply configuration are selected for the installed control input.

Contamination on exposed optics causes unstable sensing.The smooth tinted window presents a protected, wipe-clean optical face.

Technicians cannot quickly confirm whether the sensor is switching.A dedicated green indicator displays local detection status during testing.

典型的な用途

Personnel air shower occupancy detectionMaterial air shower entry sensingAutomatic shower-cycle triggeringCleanroom door-sequence control

技術的なパラメータ

Typical construction and dimensional ranges for compact air shower photoelectric sensors are shown below.

コア材料	Polycarbonate sensor housing with infrared emitter, receiver and electronic switching circuit
パネルの厚さ	25-60 mm nominal sensor housing depth
有効幅	45-90 mm nominal body width excluding mounting ears
最大長さ	Up to 150 mm overall height including connector
鋼鉄の厚さを直面する	1.0-2.0 mm stainless-steel mounting-ear thickness
コア密度	1180-1220 kg/m³ for polycarbonate housing material
熱伝導率	0.19-0.22 W/(m·K) for polycarbonate housing material
表面仕上げ	Matte black housing with dark-red optical window and green status indicator
ジョイントタイプ	Sealed two-piece housing with twin mounting ears and threaded cable connector
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Matched supply voltagePNP or NPN switching outputAdjustable detection distanceAlternative cable and connector lengths

Planning a Air Shower Infrared Sensor specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する