İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Ekipmanları Yedek Parçaları
Hava Duş Kızılötesi Sensörü
A compact photoelectric sensor that detects entry or occupancy signals for automatic air shower cycle and door-control logic.
- Non-Contact Detection
- Compact Black Housing
- Visible Status Indicator
- Secure Two-Ear Mounting
Ürün tanıtımı
The air shower infrared sensor provides a non-contact presence signal to the sequence controller when a person or material load enters the sensing zone. A dark optical window shields the emitter and receiver components, while the status LED supports alignment and service checks. Side mounting ears hold the sensing face in a repeatable position inside the chamber. Replacement compatibility depends on sensing principle, supply voltage, output logic, connector arrangement and required detection distance.
Ana Özellikler
A tinted optical window protects the sensing elements from routine chamber cleaning.
The visible indicator provides immediate confirmation of detection status.
Twin metal mounting ears support stable alignment on the air-shower panel.
Müşteri Ürün Sorunları
Reliable cycle triggering requires a sensor that matches the controller input and remains correctly aimed in the chamber.
A narrow or misaligned detection zone fails to register chamber entry.Twin mounting ears provide repeatable positioning toward the intended sensing area.
An incompatible output signal cannot trigger the existing controller.Output logic and supply configuration are selected for the installed control input.
Contamination on exposed optics causes unstable sensing.The smooth tinted window presents a protected, wipe-clean optical face.
Technicians cannot quickly confirm whether the sensor is switching.A dedicated green indicator displays local detection status during testing.
Tipik uygulamalar
Personnel air shower occupancy detectionMaterial air shower entry sensingAutomatic shower-cycle triggeringCleanroom door-sequence control
Teknik parametreler
Typical construction and dimensional ranges for compact air shower photoelectric sensors are shown below.
| Temel malzemeler | Polycarbonate sensor housing with infrared emitter, receiver and electronic switching circuit |
|---|---|
| Panel kalınlığı | 25-60 mm nominal sensor housing depth |
| Effective Width (Etkili Genişlik) | 45-90 mm nominal body width excluding mounting ears |
| Maksimum uzunluk | Up to 150 mm overall height including connector |
| Çelik yüz yüze kalınlığı | 1.0-2.0 mm stainless-steel mounting-ear thickness |
| Core Density (Çekirdek Yoğunluğu) | 1180-1220 kg/m³ for polycarbonate housing material |
| Termal İletkenlik | 0.19-0.22 W/(m·K) for polycarbonate housing material |
| Yüzey bitirme | Matte black housing with dark-red optical window and green status indicator |
| Ortak tip | Sealed two-piece housing with twin mounting ears and threaded cable connector |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Matched supply voltagePNP or NPN switching outputAdjustable detection distanceAlternative cable and connector lengths
Planning a Air Shower Infrared Sensor specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
