Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Cleanroom équipement pièces de rechange
Capteur infrarouge Air Shower
A compact photoelectric sensor that detects entry or occupancy signals for automatic air shower cycle and door-control logic.
- Non-Contact Detection
- Compact Black Housing
- Visible Status Indicator
- Secure Two-Ear Mounting
Introduction de produit
The air shower infrared sensor provides a non-contact presence signal to the sequence controller when a person or material load enters the sensing zone. A dark optical window shields the emitter and receiver components, while the status LED supports alignment and service checks. Side mounting ears hold the sensing face in a repeatable position inside the chamber. Replacement compatibility depends on sensing principle, supply voltage, output logic, connector arrangement and required detection distance.
Key Features
A tinted optical window protects the sensing elements from routine chamber cleaning.
The visible indicator provides immediate confirmation of detection status.
Twin metal mounting ears support stable alignment on the air-shower panel.
Préoccupations du client produit
Reliable cycle triggering requires a sensor that matches the controller input and remains correctly aimed in the chamber.
A narrow or misaligned detection zone fails to register chamber entry.Twin mounting ears provide repeatable positioning toward the intended sensing area.
An incompatible output signal cannot trigger the existing controller.Output logic and supply configuration are selected for the installed control input.
Contamination on exposed optics causes unstable sensing.The smooth tinted window presents a protected, wipe-clean optical face.
Technicians cannot quickly confirm whether the sensor is switching.A dedicated green indicator displays local detection status during testing.
Les applications typiques
Personnel air shower occupancy detectionMaterial air shower entry sensingAutomatic shower-cycle triggeringCleanroom door-sequence control
Paramètres techniques
Typical construction and dimensional ranges for compact air shower photoelectric sensors are shown below.
| Matériaux de base | Polycarbonate sensor housing with infrared emitter, receiver and electronic switching circuit |
|---|---|
| Panneau épaisseur | 25-60 mm nominal sensor housing depth |
| Largeur effective | 45-90 mm nominal body width excluding mounting ears |
| Longueur maximale | Up to 150 mm overall height including connector |
| Acier face épaisseur | 1.0-2.0 mm stainless-steel mounting-ear thickness |
| Densité Core | 1180-1220 kg/m³ for polycarbonate housing material |
| Conductivité thermique | 0.19-0.22 W/(m·K) for polycarbonate housing material |
| surface finie | Matte black housing with dark-red optical window and green status indicator |
| Type joint | Sealed two-piece housing with twin mounting ears and threaded cable connector |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Matched supply voltagePNP or NPN switching outputAdjustable detection distanceAlternative cable and connector lengths
Planning a Air Shower Infrared Sensor specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
