Three-quarter view of a cleanroom air shower infrared presence sensor

Cleanroom Equipment Spare Parts

Air Shower Infrared Sensor Air Shower Infrared Sensor

A compact photoelectric sensor that detects entry or occupancy signals for automatic air shower cycle and door-control logic.

Non-Contact Detection
Compact Black Housing
Visible Status Indicator
Secure Two-Ear Mounting

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The air shower infrared sensor provides a non-contact presence signal to the sequence controller when a person or material load enters the sensing zone. A dark optical window shields the emitter and receiver components, while the status LED supports alignment and service checks. Side mounting ears hold the sensing face in a repeatable position inside the chamber. Replacement compatibility depends on sensing principle, supply voltage, output logic, connector arrangement and required detection distance.

Fitur utama:

Non-contact detection avoids switches that require physical actuation.

A tinted optical window protects the sensing elements from routine chamber cleaning.

The visible indicator provides immediate confirmation of detection status.

Twin metal mounting ears support stable alignment on the air-shower panel.

Kekhawatiran produk pelanggan

Reliable cycle triggering requires a sensor that matches the controller input and remains correctly aimed in the chamber.

A narrow or misaligned detection zone fails to register chamber entry.Twin mounting ears provide repeatable positioning toward the intended sensing area.

An incompatible output signal cannot trigger the existing controller.Output logic and supply configuration are selected for the installed control input.

Contamination on exposed optics causes unstable sensing.The smooth tinted window presents a protected, wipe-clean optical face.

Technicians cannot quickly confirm whether the sensor is switching.A dedicated green indicator displays local detection status during testing.

Aplikasi yang Tipis

Personnel air shower occupancy detectionMaterial air shower entry sensingAutomatic shower-cycle triggeringCleanroom door-sequence control

Parameter teknis

Typical construction and dimensional ranges for compact air shower photoelectric sensors are shown below.

Bahan inti	Polycarbonate sensor housing with infrared emitter, receiver and electronic switching circuit
Ketebalan Panel (Panel Thickness)	25-60 mm nominal sensor housing depth
Efektif lebar	45-90 mm nominal body width excluding mounting ears
Panjang maksimum	Up to 150 mm overall height including connector
Baja menghadap ketebalan	1.0-2.0 mm stainless-steel mounting-ear thickness
Kepadatan inti (core density)	1180-1220 kg/m³ for polycarbonate housing material
Konduktivitas Termal (Thermal Conductivity)	0.19-0.22 W/(m·K) for polycarbonate housing material
Permukaan selesai	Matte black housing with dark-red optical window and green status indicator
Jenis Bersama	Sealed two-piece housing with twin mounting ears and threaded cable connector
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Matched supply voltagePNP or NPN switching outputAdjustable detection distanceAlternative cable and connector lengths

Planning a Air Shower Infrared Sensor specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami