EnglishCurrent
德语
阿拉伯语
法语
印尼语
日语
韩语
马来语
葡萄牙语
俄语
西班牙语
泰语
土耳其语
越南语
Cleanroom Garments, PPE and Consumables
Two-Piece Cleanroom Garment
A coordinated cleanroom jacket and trouser set that allows independent sizing, convenient changing and controlled overlap at the waist.
- Independently sized cleanroom jacket and trousers
- Extended waist overlap for routine operator movement
- Matched low-lint set with configurable closures and cuffs
Product Introduction
The Two-Piece Cleanroom Garment combines a long-sleeve jacket with matching trousers for controlled manufacturing and support areas. Continuous-filament polyester fabric provides a smooth, low-lint outer surface, while enclosed seams and pocket-free configurations reduce particle traps. The separate pieces simplify replacement and allow operators to select jacket and trouser sizes independently.
Key Features
Extended jacket hem supports dependable waist overlap during movement
Low-lint polyester construction with enclosed cleanroom seams
Elasticated or knitted wrist and ankle finishes available
Pocket-free and concealed-closure configurations reduce exposed traps
Customer Product Concerns
Separate garments improve fit flexibility, but they also create a waist interface that must remain covered during bending and reaching. Set identification, closure design and a coordinated care history are important for keeping the jacket and trousers compatible in service.
Jacket and trouser separation can expose the waist during reaching or bending.Specify an extended jacket hem and suitable waistband rise to maintain overlap through routine motion.
A single garment size may not fit operators with different upper- and lower-body proportions.Order jacket and trouser sizes independently using a controlled size matrix.
Open pockets and exposed fasteners can retain contaminants.Select pocket-free styling and a concealed zipper or snap placket for critical areas.
Mixed laundering histories can cause visible shade or dimensional differences between pieces.Apply matched set identification and manage both pieces under the same validated garment-care cycle.
Typical Applications
Used in electronics assembly, pharmaceutical support zones, medical-device production, laboratories, precision manufacturing and controlled warehouse operations where a two-piece gowning system is permitted.
Technical Parameters
The parameters describe a coordinated woven polyester jacket-and-trouser system rather than a single coverall. Dimensions apply to the separate laid-flat pieces, while fabric, conductive grid, waistband and cuff construction remain selectable for the permitted gowning program.
| Core Material | Continuous-filament polyester; optional conductive yarn grid |
|---|---|
| Panel Thickness | 0.22–0.48 mm |
| Effective Width | 480–780 mm per laid-flat garment section |
| Maximum Length | 1250 mm per separate garment piece |
| Steel Facing Thickness | 0 mm; no steel facing used |
| Core Density | 75–145 kg/m³ apparent fabric bulk density |
| Thermal Conductivity | 0.035–0.060 W/(m·K), material dependent |
| Surface Finish | Smooth low-lint woven surface with enclosed seam allowances |
| Joint Type | Sewn cleanroom seams with concealed jacket closure and overlapping waist interface |
| Customization | Available based on the intended application and operating environment. |
Available Options
Stand-collar jacket or cleanroom smock-style jacketElastic waist, drawcord waist or adjustable waistband trousersElasticated, knitted or open cuffsWhite, light blue, navy or other standard garment colorsOptional conductive-yarn grid fabricMatched-set identification and individual size labeling
Planning a Two-Piece Cleanroom Garment specification?
Send us your dimensions, installation conditions, performance targets and required surface finish.
