Two-piece cleanroom garment jacket and trousers three-quarter product view

クリーンルーム衣料品、 PPE 、消耗品

2 ピースクリーンルームの衣料品

A coordinated cleanroom jacket and trouser set that allows independent sizing, convenient changing and controlled overlap at the waist.

Independently sized cleanroom jacket and trousers
Extended waist overlap for routine operator movement
Matched low-lint set with configurable closures and cuffs

見積もりリクエスト製品案内

商品紹介

The Two-Piece Cleanroom Garment combines a long-sleeve jacket with matching trousers for controlled manufacturing and support areas. Continuous-filament polyester fabric provides a smooth, low-lint outer surface, while enclosed seams and pocket-free configurations reduce particle traps. The separate pieces simplify replacement and allow operators to select jacket and trouser sizes independently.

主要な特徴

Separate jacket and trousers for flexible fit and inventory control

Extended jacket hem supports dependable waist overlap during movement

Low-lint polyester construction with enclosed cleanroom seams

Elasticated or knitted wrist and ankle finishes available

Pocket-free and concealed-closure configurations reduce exposed traps

お客様の製品に関する懸念事項

Separate garments improve fit flexibility, but they also create a waist interface that must remain covered during bending and reaching. Set identification, closure design and a coordinated care history are important for keeping the jacket and trousers compatible in service.

Jacket and trouser separation can expose the waist during reaching or bending.Specify an extended jacket hem and suitable waistband rise to maintain overlap through routine motion.

A single garment size may not fit operators with different upper- and lower-body proportions.Order jacket and trouser sizes independently using a controlled size matrix.

Open pockets and exposed fasteners can retain contaminants.Select pocket-free styling and a concealed zipper or snap placket for critical areas.

Mixed laundering histories can cause visible shade or dimensional differences between pieces.Apply matched set identification and manage both pieces under the same validated garment-care cycle.

典型的な用途

Used in electronics assembly, pharmaceutical support zones, medical-device production, laboratories, precision manufacturing and controlled warehouse operations where a two-piece gowning system is permitted.

技術的なパラメータ

The parameters describe a coordinated woven polyester jacket-and-trouser system rather than a single coverall. Dimensions apply to the separate laid-flat pieces, while fabric, conductive grid, waistband and cuff construction remain selectable for the permitted gowning program.

コア材料	Continuous-filament polyester; optional conductive yarn grid
パネルの厚さ	0.22–0.48 mm
有効幅	480–780 mm per laid-flat garment section
最大長さ	1250 mm per separate garment piece
鋼鉄の厚さを直面する	0 mm; no steel facing used
コア密度	75–145 kg/m³ apparent fabric bulk density
熱伝導率	0.035–0.060 W/(m·K), material dependent
表面仕上げ	Smooth low-lint woven surface with enclosed seam allowances
ジョイントタイプ	Sewn cleanroom seams with concealed jacket closure and overlapping waist interface
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Stand-collar jacket or cleanroom smock-style jacketElastic waist, drawcord waist or adjustable waistband trousersElasticated, knitted or open cuffsWhite, light blue, navy or other standard garment colorsOptional conductive-yarn grid fabricMatched-set identification and individual size labeling

Planning a Two-Piece Cleanroom Garment specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する