Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Vestuário para sala limpa, EPI e consumíveis
Z Duas peças de vestuário para sala limpa
A coordinated cleanroom jacket and trouser set that allows independent sizing, convenient changing and controlled overlap at the waist.
- Independently sized cleanroom jacket and trousers
- Extended waist overlap for routine operator movement
- Matched low-lint set with configurable closures and cuffs
Introdução do produto
The Two-Piece Cleanroom Garment combines a long-sleeve jacket with matching trousers for controlled manufacturing and support areas. Continuous-filament polyester fabric provides a smooth, low-lint outer surface, while enclosed seams and pocket-free configurations reduce particle traps. The separate pieces simplify replacement and allow operators to select jacket and trouser sizes independently.
Características-chave
Extended jacket hem supports dependable waist overlap during movement
Low-lint polyester construction with enclosed cleanroom seams
Elasticated or knitted wrist and ankle finishes available
Pocket-free and concealed-closure configurations reduce exposed traps
Preocupações do produto do cliente
Separate garments improve fit flexibility, but they also create a waist interface that must remain covered during bending and reaching. Set identification, closure design and a coordinated care history are important for keeping the jacket and trousers compatible in service.
Jacket and trouser separation can expose the waist during reaching or bending.Specify an extended jacket hem and suitable waistband rise to maintain overlap through routine motion.
A single garment size may not fit operators with different upper- and lower-body proportions.Order jacket and trouser sizes independently using a controlled size matrix.
Open pockets and exposed fasteners can retain contaminants.Select pocket-free styling and a concealed zipper or snap placket for critical areas.
Mixed laundering histories can cause visible shade or dimensional differences between pieces.Apply matched set identification and manage both pieces under the same validated garment-care cycle.
Aplicações típicas
Used in electronics assembly, pharmaceutical support zones, medical-device production, laboratories, precision manufacturing and controlled warehouse operations where a two-piece gowning system is permitted.
Parâmetros técnicos
The parameters describe a coordinated woven polyester jacket-and-trouser system rather than a single coverall. Dimensions apply to the separate laid-flat pieces, while fabric, conductive grid, waistband and cuff construction remain selectable for the permitted gowning program.
| Material principal | Continuous-filament polyester; optional conductive yarn grid |
|---|---|
| Painel de espessura | 0.22–0.48 mm |
| Largura efetiva | 480–780 mm per laid-flat garment section |
| Comprimento máximo | 1250 mm per separate garment piece |
| Aço enfrentando espessura | 0 mm; no steel facing used |
| Densidade Core | 75–145 kg/m³ apparent fabric bulk density |
| Condutividade térmica | 0.035–0.060 W/(m·K), material dependent |
| Superfície acabado | Smooth low-lint woven surface with enclosed seam allowances |
| Tipo conjunto | Sewn cleanroom seams with concealed jacket closure and overlapping waist interface |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Stand-collar jacket or cleanroom smock-style jacketElastic waist, drawcord waist or adjustable waistband trousersElasticated, knitted or open cuffsWhite, light blue, navy or other standard garment colorsOptional conductive-yarn grid fabricMatched-set identification and individual size labeling
Planning a Two-Piece Cleanroom Garment specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
