Two-piece cleanroom garment jacket and trousers three-quarter product view

클린룸 의류, PPE 및 소모품

2 - Piece 클린룸 의류

A coordinated cleanroom jacket and trouser set that allows independent sizing, convenient changing and controlled overlap at the waist.

Independently sized cleanroom jacket and trousers
Extended waist overlap for routine operator movement
Matched low-lint set with configurable closures and cuffs

견적 요청 제품 찾아보기

상품 소개

The Two-Piece Cleanroom Garment combines a long-sleeve jacket with matching trousers for controlled manufacturing and support areas. Continuous-filament polyester fabric provides a smooth, low-lint outer surface, while enclosed seams and pocket-free configurations reduce particle traps. The separate pieces simplify replacement and allow operators to select jacket and trouser sizes independently.

주요 기능

Separate jacket and trousers for flexible fit and inventory control

Extended jacket hem supports dependable waist overlap during movement

Low-lint polyester construction with enclosed cleanroom seams

Elasticated or knitted wrist and ankle finishes available

Pocket-free and concealed-closure configurations reduce exposed traps

고객 제품 관심사

Separate garments improve fit flexibility, but they also create a waist interface that must remain covered during bending and reaching. Set identification, closure design and a coordinated care history are important for keeping the jacket and trousers compatible in service.

Jacket and trouser separation can expose the waist during reaching or bending.Specify an extended jacket hem and suitable waistband rise to maintain overlap through routine motion.

A single garment size may not fit operators with different upper- and lower-body proportions.Order jacket and trouser sizes independently using a controlled size matrix.

Open pockets and exposed fasteners can retain contaminants.Select pocket-free styling and a concealed zipper or snap placket for critical areas.

Mixed laundering histories can cause visible shade or dimensional differences between pieces.Apply matched set identification and manage both pieces under the same validated garment-care cycle.

일반적인 응용 프로그램

Used in electronics assembly, pharmaceutical support zones, medical-device production, laboratories, precision manufacturing and controlled warehouse operations where a two-piece gowning system is permitted.

기술 매개변수

The parameters describe a coordinated woven polyester jacket-and-trouser system rather than a single coverall. Dimensions apply to the separate laid-flat pieces, while fabric, conductive grid, waistband and cuff construction remain selectable for the permitted gowning program.

핵심 재료	Continuous-filament polyester; optional conductive yarn grid
패널 두께	0.22–0.48 mm
유효 폭	480–780 mm per laid-flat garment section
최대 길이	1250 mm per separate garment piece
강철 면면 두께	0 mm, 강철 면재 사용 없음
코어 밀도	75–145 kg/m³ apparent fabric bulk density
열전도도 (Thermal Conductivity)	0.035–0.060 W/(m·K), material dependent
표면 마무리	Smooth low-lint woven surface with enclosed seam allowances
접합 유형	Sewn cleanroom seams with concealed jacket closure and overlapping waist interface
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Stand-collar jacket or cleanroom smock-style jacketElastic waist, drawcord waist or adjustable waistband trousersElasticated, knitted or open cuffsWhite, light blue, navy or other standard garment colorsOptional conductive-yarn grid fabricMatched-set identification and individual size labeling

Planning a Two-Piece Cleanroom Garment specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.