English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
ملابس الغرف النظيفة، PPE والمواد الاستهلاكية
قطعتين غرف الأبحاث الملابس
A coordinated cleanroom jacket and trouser set that allows independent sizing, convenient changing and controlled overlap at the waist.
- Independently sized cleanroom jacket and trousers
- Extended waist overlap for routine operator movement
- Matched low-lint set with configurable closures and cuffs
مقدمة المنتج
The Two-Piece Cleanroom Garment combines a long-sleeve jacket with matching trousers for controlled manufacturing and support areas. Continuous-filament polyester fabric provides a smooth, low-lint outer surface, while enclosed seams and pocket-free configurations reduce particle traps. The separate pieces simplify replacement and allow operators to select jacket and trouser sizes independently.
الخصائص الرئيسية
Extended jacket hem supports dependable waist overlap during movement
Low-lint polyester construction with enclosed cleanroom seams
Elasticated or knitted wrist and ankle finishes available
Pocket-free and concealed-closure configurations reduce exposed traps
مخاوف المنتج للعملاء
Separate garments improve fit flexibility, but they also create a waist interface that must remain covered during bending and reaching. Set identification, closure design and a coordinated care history are important for keeping the jacket and trousers compatible in service.
Jacket and trouser separation can expose the waist during reaching or bending.Specify an extended jacket hem and suitable waistband rise to maintain overlap through routine motion.
A single garment size may not fit operators with different upper- and lower-body proportions.Order jacket and trouser sizes independently using a controlled size matrix.
Open pockets and exposed fasteners can retain contaminants.Select pocket-free styling and a concealed zipper or snap placket for critical areas.
Mixed laundering histories can cause visible shade or dimensional differences between pieces.Apply matched set identification and manage both pieces under the same validated garment-care cycle.
تطبيقات نموذجية
Used in electronics assembly, pharmaceutical support zones, medical-device production, laboratories, precision manufacturing and controlled warehouse operations where a two-piece gowning system is permitted.
المعلمات الفنية
The parameters describe a coordinated woven polyester jacket-and-trouser system rather than a single coverall. Dimensions apply to the separate laid-flat pieces, while fabric, conductive grid, waistband and cuff construction remain selectable for the permitted gowning program.
| المواد الأساسية | Continuous-filament polyester; optional conductive yarn grid |
|---|---|
| سمك اللوحة | 0.22–0.48 mm |
| العرض الفعال | 480–780 mm per laid-flat garment section |
| الحد الأقصى الطول | 1250 mm per separate garment piece |
| الصلب يواجه سمك | 0 mm; no steel facing used |
| الكثافة الأساسية | 75–145 kg/m³ apparent fabric bulk density |
| الموصلية الحرارية | 0.035–0.060 W/(m·K), material dependent |
| إنهاء السطح | Smooth low-lint woven surface with enclosed seam allowances |
| نوع المشترك | Sewn cleanroom seams with concealed jacket closure and overlapping waist interface |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Stand-collar jacket or cleanroom smock-style jacketElastic waist, drawcord waist or adjustable waistband trousersElasticated, knitted or open cuffsWhite, light blue, navy or other standard garment colorsOptional conductive-yarn grid fabricMatched-set identification and individual size labeling
Planning a Two-Piece Cleanroom Garment specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
