Two-piece cleanroom garment jacket and trousers three-quarter product view

Temiz Oda Giysileri, PPE ve Tüketim Malzemeleri

İki parçalı temiz oda giysisi

A coordinated cleanroom jacket and trouser set that allows independent sizing, convenient changing and controlled overlap at the waist.

Independently sized cleanroom jacket and trousers
Extended waist overlap for routine operator movement
Matched low-lint set with configurable closures and cuffs

Alıntı isteği Browse ürünleri

Ürün tanıtımı

The Two-Piece Cleanroom Garment combines a long-sleeve jacket with matching trousers for controlled manufacturing and support areas. Continuous-filament polyester fabric provides a smooth, low-lint outer surface, while enclosed seams and pocket-free configurations reduce particle traps. The separate pieces simplify replacement and allow operators to select jacket and trouser sizes independently.

Ana Özellikler

Separate jacket and trousers for flexible fit and inventory control

Extended jacket hem supports dependable waist overlap during movement

Low-lint polyester construction with enclosed cleanroom seams

Elasticated or knitted wrist and ankle finishes available

Pocket-free and concealed-closure configurations reduce exposed traps

Müşteri Ürün Sorunları

Separate garments improve fit flexibility, but they also create a waist interface that must remain covered during bending and reaching. Set identification, closure design and a coordinated care history are important for keeping the jacket and trousers compatible in service.

Jacket and trouser separation can expose the waist during reaching or bending.Specify an extended jacket hem and suitable waistband rise to maintain overlap through routine motion.

A single garment size may not fit operators with different upper- and lower-body proportions.Order jacket and trouser sizes independently using a controlled size matrix.

Open pockets and exposed fasteners can retain contaminants.Select pocket-free styling and a concealed zipper or snap placket for critical areas.

Mixed laundering histories can cause visible shade or dimensional differences between pieces.Apply matched set identification and manage both pieces under the same validated garment-care cycle.

Tipik uygulamalar

Used in electronics assembly, pharmaceutical support zones, medical-device production, laboratories, precision manufacturing and controlled warehouse operations where a two-piece gowning system is permitted.

Teknik parametreler

The parameters describe a coordinated woven polyester jacket-and-trouser system rather than a single coverall. Dimensions apply to the separate laid-flat pieces, while fabric, conductive grid, waistband and cuff construction remain selectable for the permitted gowning program.

Temel malzemeler	Continuous-filament polyester; optional conductive yarn grid
Panel kalınlığı	0.22–0.48 mm
Effective Width (Etkili Genişlik)	480–780 mm per laid-flat garment section
Maksimum uzunluk	1250 mm per separate garment piece
Çelik yüz yüze kalınlığı	0 mm; Çelik yüzü kullanılmaz
Core Density (Çekirdek Yoğunluğu)	75–145 kg/m³ apparent fabric bulk density
Termal İletkenlik	0.035–0.060 W/(m·K), material dependent
Yüzey bitirme	Smooth low-lint woven surface with enclosed seam allowances
Ortak tip	Sewn cleanroom seams with concealed jacket closure and overlapping waist interface
Customization (Özelleşme)	Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Mevcut Seçenekler

Stand-collar jacket or cleanroom smock-style jacketElastic waist, drawcord waist or adjustable waistband trousersElasticated, knitted or open cuffsWhite, light blue, navy or other standard garment colorsOptional conductive-yarn grid fabricMatched-set identification and individual size labeling

Planning a Two-Piece Cleanroom Garment specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun