Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Prendas de sala limpia, EPP y consumibles
Dos piezas de limpieza
A coordinated cleanroom jacket and trouser set that allows independent sizing, convenient changing and controlled overlap at the waist.
- Independently sized cleanroom jacket and trousers
- Extended waist overlap for routine operator movement
- Matched low-lint set with configurable closures and cuffs
Introducción del producto
The Two-Piece Cleanroom Garment combines a long-sleeve jacket with matching trousers for controlled manufacturing and support areas. Continuous-filament polyester fabric provides a smooth, low-lint outer surface, while enclosed seams and pocket-free configurations reduce particle traps. The separate pieces simplify replacement and allow operators to select jacket and trouser sizes independently.
Características clave
Extended jacket hem supports dependable waist overlap during movement
Low-lint polyester construction with enclosed cleanroom seams
Elasticated or knitted wrist and ankle finishes available
Pocket-free and concealed-closure configurations reduce exposed traps
Preocupaciones del producto del cliente
Separate garments improve fit flexibility, but they also create a waist interface that must remain covered during bending and reaching. Set identification, closure design and a coordinated care history are important for keeping the jacket and trousers compatible in service.
Jacket and trouser separation can expose the waist during reaching or bending.Specify an extended jacket hem and suitable waistband rise to maintain overlap through routine motion.
A single garment size may not fit operators with different upper- and lower-body proportions.Order jacket and trouser sizes independently using a controlled size matrix.
Open pockets and exposed fasteners can retain contaminants.Select pocket-free styling and a concealed zipper or snap placket for critical areas.
Mixed laundering histories can cause visible shade or dimensional differences between pieces.Apply matched set identification and manage both pieces under the same validated garment-care cycle.
Aplicaciones típicas
Used in electronics assembly, pharmaceutical support zones, medical-device production, laboratories, precision manufacturing and controlled warehouse operations where a two-piece gowning system is permitted.
Parámetros técnicos
The parameters describe a coordinated woven polyester jacket-and-trouser system rather than a single coverall. Dimensions apply to the separate laid-flat pieces, while fabric, conductive grid, waistband and cuff construction remain selectable for the permitted gowning program.
| Materiales Core | Continuous-filament polyester; optional conductive yarn grid |
|---|---|
| Panel de espesor | 0.22–0.48 mm |
| Ancho efectivo | 480–780 mm per laid-flat garment section |
| Longitud máxima | 1250 mm per separate garment piece |
| Acero frente a espesor | 0 mm; no steel facing used |
| Densidad Core | 75–145 kg/m³ apparent fabric bulk density |
| Conductividad térmica | 0.035–0.060 W/(m·K), material dependent |
| Superficie acabada | Smooth low-lint woven surface with enclosed seam allowances |
| Tipo conjunto | Sewn cleanroom seams with concealed jacket closure and overlapping waist interface |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Stand-collar jacket or cleanroom smock-style jacketElastic waist, drawcord waist or adjustable waistband trousersElasticated, knitted or open cuffsWhite, light blue, navy or other standard garment colorsOptional conductive-yarn grid fabricMatched-set identification and individual size labeling
Planning a Two-Piece Cleanroom Garment specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
