English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Одежда для чистых комнат, ИПП и расходные материалы
Двухкомпонентная одежда для чистых комнат
A coordinated cleanroom jacket and trouser set that allows independent sizing, convenient changing and controlled overlap at the waist.
- Independently sized cleanroom jacket and trousers
- Extended waist overlap for routine operator movement
- Matched low-lint set with configurable closures and cuffs
Введение продукции
The Two-Piece Cleanroom Garment combines a long-sleeve jacket with matching trousers for controlled manufacturing and support areas. Continuous-filament polyester fabric provides a smooth, low-lint outer surface, while enclosed seams and pocket-free configurations reduce particle traps. The separate pieces simplify replacement and allow operators to select jacket and trouser sizes independently.
Основные характеристики
Extended jacket hem supports dependable waist overlap during movement
Low-lint polyester construction with enclosed cleanroom seams
Elasticated or knitted wrist and ankle finishes available
Pocket-free and concealed-closure configurations reduce exposed traps
Обеспокоенность клиентов продуктами
Separate garments improve fit flexibility, but they also create a waist interface that must remain covered during bending and reaching. Set identification, closure design and a coordinated care history are important for keeping the jacket and trousers compatible in service.
Jacket and trouser separation can expose the waist during reaching or bending.Specify an extended jacket hem and suitable waistband rise to maintain overlap through routine motion.
A single garment size may not fit operators with different upper- and lower-body proportions.Order jacket and trouser sizes independently using a controlled size matrix.
Open pockets and exposed fasteners can retain contaminants.Select pocket-free styling and a concealed zipper or snap placket for critical areas.
Mixed laundering histories can cause visible shade or dimensional differences between pieces.Apply matched set identification and manage both pieces under the same validated garment-care cycle.
Типичные приложения
Used in electronics assembly, pharmaceutical support zones, medical-device production, laboratories, precision manufacturing and controlled warehouse operations where a two-piece gowning system is permitted.
Технические параметры
The parameters describe a coordinated woven polyester jacket-and-trouser system rather than a single coverall. Dimensions apply to the separate laid-flat pieces, while fabric, conductive grid, waistband and cuff construction remain selectable for the permitted gowning program.
| Основной материал | Continuous-filament polyester; optional conductive yarn grid |
|---|---|
| Толщина панели | 0.22–0.48 mm |
| эффективная ширина | 480–780 mm per laid-flat garment section |
| Максимальная длина | 1250 mm per separate garment piece |
| Толщина линий стали | 0 mm; no steel facing used |
| Плотность ядра | 75–145 kg/m³ apparent fabric bulk density |
| Теплопроводимость | 0.035–0.060 W/(m·K), material dependent |
| Поверхностная отделка | Smooth low-lint woven surface with enclosed seam allowances |
| Объединенный тип | Sewn cleanroom seams with concealed jacket closure and overlapping waist interface |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Stand-collar jacket or cleanroom smock-style jacketElastic waist, drawcord waist or adjustable waistband trousersElasticated, knitted or open cuffsWhite, light blue, navy or other standard garment colorsOptional conductive-yarn grid fabricMatched-set identification and individual size labeling
Planning a Two-Piece Cleanroom Garment specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
