EnglishCurrent
德语
阿拉伯语
法语
印尼语
日语
韩语
马来语
葡萄牙语
俄语
西班牙语
泰语
土耳其语
越南语
Cleanroom Cleaning, Disinfection and Sterilization
Ride-On Cleanroom Scrubber
Compact battery-powered ride-on scrubber dryer adapted for efficient cleaning of large controlled-area floors with immediate wastewater recovery.
- Compact ride-on productivity
- Speed-responsive solution delivery
- Immediate wastewater recovery
Product Introduction
The Ride-On Cleanroom Scrubber increases floor-care productivity across wide corridors, logistics interfaces and large controlled production rooms. Its seated operator platform combines a disk scrubbing deck, speed-responsive solution dosing and a curved recovery squeegee. Smooth cleanable tanks, non-marking tires and restrained exterior joints support controlled-area housekeeping. Intuitive controls allow defined cleaning programs, while low-noise battery operation reduces disruption during occupied shifts.
Key Features
Speed-responsive solution flow limits excess water and detergent.
One-touch deck and squeegee actuation simplifies repeatable operation.
Separate smooth fresh-water and recovery tanks.
Non-marking tires and low-shedding blade materials.
Battery power supports quiet, cable-free cleaning.
Customer Product Concerns
The design addresses cleaning productivity, controlled dosing, standardized operation and wet-floor risk.
Low productivity over large areasSeated operation and higher travel speed reduce cleaning time.
Excess solution at cornersSpeed-responsive dosing reduces flow as the machine slows.
Operator setting errorsDefined cleaning programs and supervisor access help standardize operation.
Wet floor after passageA wide curved squeegee and recovery vacuum collect solution immediately.
Typical Applications
Large pharmaceutical production roomsWide cleanroom corridors and material-transfer areasMedical-device and electronics plantsControlled warehouse interfacesCoated, epoxy and resilient floor systems
Technical Parameters
The following specification represents a compact rider configured for large controlled floor areas.
| Core Material | Rotomolded polyethylene tanks with coated steel chassis |
|---|---|
| Panel Thickness | 5–8 mm nominal tank-wall thickness |
| Effective Width | 530–850 mm scrubbing width |
| Maximum Length | 1500 mm nominal machine length |
| Steel Facing Thickness | 2.0 mm nominal chassis sheet thickness |
| Core Density | 950 kg/m³ nominal polyethylene density |
| Thermal Conductivity | 0.42 W/(m·K) nominal for tank material |
| Surface Finish | Smooth white and light-blue polymer with stainless hardware |
| Joint Type | Gasketed tanks with quick-release brush deck and squeegee |
| Customization | Available based on the intended application and operating environment. |
Available Options
Disk or cylindrical brush deckLithium-ion or maintenance-free batteryHEPA-filtered recovery exhaustAutomatic tank filling and rinse packageColor-coded brushes, pads and squeegee blades
Planning a Ride-On Cleanroom Scrubber specification?
Send us your dimensions, installation conditions, performance targets and required surface finish.
