Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Limpieza de sala limpia, desinfección y esterilización
Ride-on limpio scrubber
Compact battery-powered ride-on scrubber dryer adapted for efficient cleaning of large controlled-area floors with immediate wastewater recovery.
- Compact ride-on productivity
- Speed-responsive solution delivery
- Immediate wastewater recovery
Introducción del producto
The Ride-On Cleanroom Scrubber increases floor-care productivity across wide corridors, logistics interfaces and large controlled production rooms. Its seated operator platform combines a disk scrubbing deck, speed-responsive solution dosing and a curved recovery squeegee. Smooth cleanable tanks, non-marking tires and restrained exterior joints support controlled-area housekeeping. Intuitive controls allow defined cleaning programs, while low-noise battery operation reduces disruption during occupied shifts.
Características clave
Speed-responsive solution flow limits excess water and detergent.
One-touch deck and squeegee actuation simplifies repeatable operation.
Separate smooth fresh-water and recovery tanks.
Non-marking tires and low-shedding blade materials.
Battery power supports quiet, cable-free cleaning.
Preocupaciones del producto del cliente
The design addresses cleaning productivity, controlled dosing, standardized operation and wet-floor risk.
Low productivity over large areasSeated operation and higher travel speed reduce cleaning time.
Excess solution at cornersSpeed-responsive dosing reduces flow as the machine slows.
Operator setting errorsDefined cleaning programs and supervisor access help standardize operation.
Wet floor after passageA wide curved squeegee and recovery vacuum collect solution immediately.
Aplicaciones típicas
Large pharmaceutical production roomsWide cleanroom corridors and material-transfer areasMedical-device and electronics plantsControlled warehouse interfacesCoated, epoxy and resilient floor systems
Parámetros técnicos
The following specification represents a compact rider configured for large controlled floor areas.
| Materiales Core | Rotomolded polyethylene tanks with coated steel chassis |
|---|---|
| Panel de espesor | 5–8 mm nominal tank-wall thickness |
| Ancho efectivo | 530–850 mm scrubbing width |
| Longitud máxima | 1500 mm nominal machine length |
| Acero frente a espesor | 2.0 mm nominal chassis sheet thickness |
| Densidad Core | 950 kg/m³ nominal polyethylene density |
| Conductividad térmica | 0.42 W/(m·K) nominal for tank material |
| Superficie acabada | Smooth white and light-blue polymer with stainless hardware |
| Tipo conjunto | Gasketed tanks with quick-release brush deck and squeegee |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Disk or cylindrical brush deckLithium-ion or maintenance-free batteryHEPA-filtered recovery exhaustAutomatic tank filling and rinse packageColor-coded brushes, pads and squeegee blades
Planning a Ride-On Cleanroom Scrubber specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
