Ride-on cleanroom scrubber in complete three-quarter view

クリーンルームの清掃 · 消毒 · 滅菌

Ride—On クリーンルームスクラバー

Compact battery-powered ride-on scrubber dryer adapted for efficient cleaning of large controlled-area floors with immediate wastewater recovery.

Compact ride-on productivity
Speed-responsive solution delivery
Immediate wastewater recovery

見積もりリクエスト製品案内

商品紹介

The Ride-On Cleanroom Scrubber increases floor-care productivity across wide corridors, logistics interfaces and large controlled production rooms. Its seated operator platform combines a disk scrubbing deck, speed-responsive solution dosing and a curved recovery squeegee. Smooth cleanable tanks, non-marking tires and restrained exterior joints support controlled-area housekeeping. Intuitive controls allow defined cleaning programs, while low-noise battery operation reduces disruption during occupied shifts.

主要な特徴

Ride-on productivity in a compact maneuverable chassis.

Speed-responsive solution flow limits excess water and detergent.

One-touch deck and squeegee actuation simplifies repeatable operation.

Separate smooth fresh-water and recovery tanks.

Non-marking tires and low-shedding blade materials.

Battery power supports quiet, cable-free cleaning.

お客様の製品に関する懸念事項

The design addresses cleaning productivity, controlled dosing, standardized operation and wet-floor risk.

Low productivity over large areasSeated operation and higher travel speed reduce cleaning time.

Excess solution at cornersSpeed-responsive dosing reduces flow as the machine slows.

Operator setting errorsDefined cleaning programs and supervisor access help standardize operation.

Wet floor after passageA wide curved squeegee and recovery vacuum collect solution immediately.

典型的な用途

Large pharmaceutical production roomsWide cleanroom corridors and material-transfer areasMedical-device and electronics plantsControlled warehouse interfacesCoated, epoxy and resilient floor systems

技術的なパラメータ

The following specification represents a compact rider configured for large controlled floor areas.

コア材料	Rotomolded polyethylene tanks with coated steel chassis
パネルの厚さ	5–8 mm nominal tank-wall thickness
有効幅	530–850 mm scrubbing width
最大長さ	1500 mm nominal machine length
鋼鉄の厚さを直面する	2.0 mm nominal chassis sheet thickness
コア密度	950 kg/m³ nominal polyethylene density
熱伝導率	0.42 W/(m·K) nominal for tank material
表面仕上げ	Smooth white and light-blue polymer with stainless hardware
ジョイントタイプ	Gasketed tanks with quick-release brush deck and squeegee
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Disk or cylindrical brush deckLithium-ion or maintenance-free batteryHEPA-filtered recovery exhaustAutomatic tank filling and rinse packageColor-coded brushes, pads and squeegee blades

Planning a Ride-On Cleanroom Scrubber specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する