English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Уборка, дезинфекция и стерилизация чистых помещений
Скруббер для чистых помещений Ride-On
Compact battery-powered ride-on scrubber dryer adapted for efficient cleaning of large controlled-area floors with immediate wastewater recovery.
- Compact ride-on productivity
- Speed-responsive solution delivery
- Immediate wastewater recovery
Введение продукции
The Ride-On Cleanroom Scrubber increases floor-care productivity across wide corridors, logistics interfaces and large controlled production rooms. Its seated operator platform combines a disk scrubbing deck, speed-responsive solution dosing and a curved recovery squeegee. Smooth cleanable tanks, non-marking tires and restrained exterior joints support controlled-area housekeeping. Intuitive controls allow defined cleaning programs, while low-noise battery operation reduces disruption during occupied shifts.
Основные характеристики
Speed-responsive solution flow limits excess water and detergent.
One-touch deck and squeegee actuation simplifies repeatable operation.
Separate smooth fresh-water and recovery tanks.
Non-marking tires and low-shedding blade materials.
Battery power supports quiet, cable-free cleaning.
Обеспокоенность клиентов продуктами
The design addresses cleaning productivity, controlled dosing, standardized operation and wet-floor risk.
Low productivity over large areasSeated operation and higher travel speed reduce cleaning time.
Excess solution at cornersSpeed-responsive dosing reduces flow as the machine slows.
Operator setting errorsDefined cleaning programs and supervisor access help standardize operation.
Wet floor after passageA wide curved squeegee and recovery vacuum collect solution immediately.
Типичные приложения
Large pharmaceutical production roomsWide cleanroom corridors and material-transfer areasMedical-device and electronics plantsControlled warehouse interfacesCoated, epoxy and resilient floor systems
Технические параметры
The following specification represents a compact rider configured for large controlled floor areas.
| Основной материал | Rotomolded polyethylene tanks with coated steel chassis |
|---|---|
| Толщина панели | 5–8 mm nominal tank-wall thickness |
| эффективная ширина | 530–850 mm scrubbing width |
| Максимальная длина | 1500 mm nominal machine length |
| Толщина линий стали | 2.0 mm nominal chassis sheet thickness |
| Плотность ядра | 950 kg/m³ nominal polyethylene density |
| Теплопроводимость | 0.42 W/(m·K) nominal for tank material |
| Поверхностная отделка | Smooth white and light-blue polymer with stainless hardware |
| Объединенный тип | Gasketed tanks with quick-release brush deck and squeegee |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Disk or cylindrical brush deckLithium-ion or maintenance-free batteryHEPA-filtered recovery exhaustAutomatic tank filling and rinse packageColor-coded brushes, pads and squeegee blades
Planning a Ride-On Cleanroom Scrubber specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
