Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Limpeza, desinfecção e esterilização da sala limpa
Ride-On Cleanroom Scrubber (em inglês)
Compact battery-powered ride-on scrubber dryer adapted for efficient cleaning of large controlled-area floors with immediate wastewater recovery.
- Compact ride-on productivity
- Speed-responsive solution delivery
- Immediate wastewater recovery
Introdução do produto
The Ride-On Cleanroom Scrubber increases floor-care productivity across wide corridors, logistics interfaces and large controlled production rooms. Its seated operator platform combines a disk scrubbing deck, speed-responsive solution dosing and a curved recovery squeegee. Smooth cleanable tanks, non-marking tires and restrained exterior joints support controlled-area housekeeping. Intuitive controls allow defined cleaning programs, while low-noise battery operation reduces disruption during occupied shifts.
Características-chave
Speed-responsive solution flow limits excess water and detergent.
One-touch deck and squeegee actuation simplifies repeatable operation.
Separate smooth fresh-water and recovery tanks.
Non-marking tires and low-shedding blade materials.
Battery power supports quiet, cable-free cleaning.
Preocupações do produto do cliente
The design addresses cleaning productivity, controlled dosing, standardized operation and wet-floor risk.
Low productivity over large areasSeated operation and higher travel speed reduce cleaning time.
Excess solution at cornersSpeed-responsive dosing reduces flow as the machine slows.
Operator setting errorsDefined cleaning programs and supervisor access help standardize operation.
Wet floor after passageA wide curved squeegee and recovery vacuum collect solution immediately.
Aplicações típicas
Large pharmaceutical production roomsWide cleanroom corridors and material-transfer areasMedical-device and electronics plantsControlled warehouse interfacesCoated, epoxy and resilient floor systems
Parâmetros técnicos
The following specification represents a compact rider configured for large controlled floor areas.
| Material principal | Rotomolded polyethylene tanks with coated steel chassis |
|---|---|
| Painel de espessura | 5–8 mm nominal tank-wall thickness |
| Largura efetiva | 530–850 mm scrubbing width |
| Comprimento máximo | 1500 mm nominal machine length |
| Aço enfrentando espessura | 2.0 mm nominal chassis sheet thickness |
| Densidade Core | 950 kg/m³ nominal polyethylene density |
| Condutividade térmica | 0.42 W/(m·K) nominal for tank material |
| Superfície acabado | Smooth white and light-blue polymer with stainless hardware |
| Tipo conjunto | Gasketed tanks with quick-release brush deck and squeegee |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Disk or cylindrical brush deckLithium-ion or maintenance-free batteryHEPA-filtered recovery exhaustAutomatic tank filling and rinse packageColor-coded brushes, pads and squeegee blades
Planning a Ride-On Cleanroom Scrubber specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
