영어
독일어
아랍어
프랑스어
인도네시아어
일본어
한국어현재 Current
말레이어
포르투갈어
러시아어
스페인어
태국어
터키어
베트남어
클린룸 청소, 소독 및 소독
Ride - On Cleanroom Scrubber (클린룸 스크러버)
Compact battery-powered ride-on scrubber dryer adapted for efficient cleaning of large controlled-area floors with immediate wastewater recovery.
- Compact ride-on productivity
- Speed-responsive solution delivery
- Immediate wastewater recovery
상품 소개
The Ride-On Cleanroom Scrubber increases floor-care productivity across wide corridors, logistics interfaces and large controlled production rooms. Its seated operator platform combines a disk scrubbing deck, speed-responsive solution dosing and a curved recovery squeegee. Smooth cleanable tanks, non-marking tires and restrained exterior joints support controlled-area housekeeping. Intuitive controls allow defined cleaning programs, while low-noise battery operation reduces disruption during occupied shifts.
주요 기능
Speed-responsive solution flow limits excess water and detergent.
One-touch deck and squeegee actuation simplifies repeatable operation.
Separate smooth fresh-water and recovery tanks.
Non-marking tires and low-shedding blade materials.
Battery power supports quiet, cable-free cleaning.
고객 제품 관심사
The design addresses cleaning productivity, controlled dosing, standardized operation and wet-floor risk.
Low productivity over large areasSeated operation and higher travel speed reduce cleaning time.
Excess solution at cornersSpeed-responsive dosing reduces flow as the machine slows.
Operator setting errorsDefined cleaning programs and supervisor access help standardize operation.
Wet floor after passageA wide curved squeegee and recovery vacuum collect solution immediately.
일반적인 응용 프로그램
Large pharmaceutical production roomsWide cleanroom corridors and material-transfer areasMedical-device and electronics plantsControlled warehouse interfacesCoated, epoxy and resilient floor systems
기술 매개변수
The following specification represents a compact rider configured for large controlled floor areas.
| 핵심 재료 | Rotomolded polyethylene tanks with coated steel chassis |
|---|---|
| 패널 두께 | 5–8 mm nominal tank-wall thickness |
| 유효 폭 | 530–850 mm scrubbing width |
| 최대 길이 | 1500 mm nominal machine length |
| 강철 면면 두께 | 2.0 mm nominal chassis sheet thickness |
| 코어 밀도 | 950 kg/m³ nominal polyethylene density |
| 열전도도 (Thermal Conductivity) | 0.42 W/(m·K) nominal for tank material |
| 표면 마무리 | Smooth white and light-blue polymer with stainless hardware |
| 접합 유형 | Gasketed tanks with quick-release brush deck and squeegee |
| 사용자 정의 | 의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다. |
사용 가능한 옵션
Disk or cylindrical brush deckLithium-ion or maintenance-free batteryHEPA-filtered recovery exhaustAutomatic tank filling and rinse packageColor-coded brushes, pads and squeegee blades
Planning a Ride-On Cleanroom Scrubber specification?
치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.
