Bahasa Inggris
Bahasa Jerman
Bahasa Arab
Bahasa Perancis: Bahasa Perancis
Bahasa IndonesiaSaat ini
Bahasa Jepang
Bahasa Korea
Bahasa Melayu
Bahasa Portugis
Bahasa Rusia
Bahasa Spanyol
Bahasa Thailand
Bahasa Turki
Bahasa Vietnam
Pembersihan Ruang Bersih, Disinfeksi dan Sterilisasi
Ride-On Cleanroom Scrubber
Compact battery-powered ride-on scrubber dryer adapted for efficient cleaning of large controlled-area floors with immediate wastewater recovery.
- Compact ride-on productivity
- Speed-responsive solution delivery
- Immediate wastewater recovery
Perkenalan produk
The Ride-On Cleanroom Scrubber increases floor-care productivity across wide corridors, logistics interfaces and large controlled production rooms. Its seated operator platform combines a disk scrubbing deck, speed-responsive solution dosing and a curved recovery squeegee. Smooth cleanable tanks, non-marking tires and restrained exterior joints support controlled-area housekeeping. Intuitive controls allow defined cleaning programs, while low-noise battery operation reduces disruption during occupied shifts.
Fitur utama:
Speed-responsive solution flow limits excess water and detergent.
One-touch deck and squeegee actuation simplifies repeatable operation.
Separate smooth fresh-water and recovery tanks.
Non-marking tires and low-shedding blade materials.
Battery power supports quiet, cable-free cleaning.
Kekhawatiran produk pelanggan
The design addresses cleaning productivity, controlled dosing, standardized operation and wet-floor risk.
Low productivity over large areasSeated operation and higher travel speed reduce cleaning time.
Excess solution at cornersSpeed-responsive dosing reduces flow as the machine slows.
Operator setting errorsDefined cleaning programs and supervisor access help standardize operation.
Wet floor after passageA wide curved squeegee and recovery vacuum collect solution immediately.
Aplikasi yang Tipis
Large pharmaceutical production roomsWide cleanroom corridors and material-transfer areasMedical-device and electronics plantsControlled warehouse interfacesCoated, epoxy and resilient floor systems
Parameter teknis
The following specification represents a compact rider configured for large controlled floor areas.
| Bahan inti | Rotomolded polyethylene tanks with coated steel chassis |
|---|---|
| Ketebalan Panel (Panel Thickness) | 5–8 mm nominal tank-wall thickness |
| Efektif lebar | 530–850 mm scrubbing width |
| Panjang maksimum | 1500 mm nominal machine length |
| Baja menghadap ketebalan | 2.0 mm nominal chassis sheet thickness |
| Kepadatan inti (core density) | 950 kg/m³ nominal polyethylene density |
| Konduktivitas Termal (Thermal Conductivity) | 0.42 W/(m·K) nominal for tank material |
| Permukaan selesai | Smooth white and light-blue polymer with stainless hardware |
| Jenis Bersama | Gasketed tanks with quick-release brush deck and squeegee |
| Customization (Kustomisasi) | Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi. |
Pilihan yang tersedia
Disk or cylindrical brush deckLithium-ion or maintenance-free batteryHEPA-filtered recovery exhaustAutomatic tank filling and rinse packageColor-coded brushes, pads and squeegee blades
Planning a Ride-On Cleanroom Scrubber specification?
Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.
