Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Reinraumreinigung, Desinfektion und Sterilisation
Ride-On Cleanroom Scrubber
Compact battery-powered ride-on scrubber dryer adapted for efficient cleaning of large controlled-area floors with immediate wastewater recovery.
- Compact ride-on productivity
- Speed-responsive solution delivery
- Immediate wastewater recovery
Produkteinführung
The Ride-On Cleanroom Scrubber increases floor-care productivity across wide corridors, logistics interfaces and large controlled production rooms. Its seated operator platform combines a disk scrubbing deck, speed-responsive solution dosing and a curved recovery squeegee. Smooth cleanable tanks, non-marking tires and restrained exterior joints support controlled-area housekeeping. Intuitive controls allow defined cleaning programs, while low-noise battery operation reduces disruption during occupied shifts.
Key Features
Speed-responsive solution flow limits excess water and detergent.
One-touch deck and squeegee actuation simplifies repeatable operation.
Separate smooth fresh-water and recovery tanks.
Non-marking tires and low-shedding blade materials.
Battery power supports quiet, cable-free cleaning.
Kunden Produktbedenken
The design addresses cleaning productivity, controlled dosing, standardized operation and wet-floor risk.
Low productivity over large areasSeated operation and higher travel speed reduce cleaning time.
Excess solution at cornersSpeed-responsive dosing reduces flow as the machine slows.
Operator setting errorsDefined cleaning programs and supervisor access help standardize operation.
Wet floor after passageA wide curved squeegee and recovery vacuum collect solution immediately.
Typische Anwendungen
Large pharmaceutical production roomsWide cleanroom corridors and material-transfer areasMedical-device and electronics plantsControlled warehouse interfacesCoated, epoxy and resilient floor systems
Technische Parameter
The following specification represents a compact rider configured for large controlled floor areas.
| Core Material | Rotomolded polyethylene tanks with coated steel chassis |
|---|---|
| Panel Dicke | 5–8 mm nominal tank-wall thickness |
| Effektive Breite | 530–850 mm scrubbing width |
| Maximale Länge | 1500 mm nominal machine length |
| Stahl facing Dicke | 2.0 mm nominal chassis sheet thickness |
| Kerndichte | 950 kg/m³ nominal polyethylene density |
| Thermische Leitfähigkeit | 0.42 W/(m·K) nominal for tank material |
| Oberfläche Finish | Smooth white and light-blue polymer with stainless hardware |
| Gemeinsamer Typ | Gasketed tanks with quick-release brush deck and squeegee |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Disk or cylindrical brush deckLithium-ion or maintenance-free batteryHEPA-filtered recovery exhaustAutomatic tank filling and rinse packageColor-coded brushes, pads and squeegee blades
Planning a Ride-On Cleanroom Scrubber specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
