English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات تهوية وتكييف ومعالجة الهواء في الغرف النظيفة
وحدة معالجة الهواء الغرف النظيفة
A low-leakage hygienic air handler designed to filter, cool, heat and condition supply air for pressure-controlled clean production spaces.
- Smooth Hygienic Interior
- الترشيح متعدد المراحل
- Controlled Supply Air
- Condensation-Resistant Casing
مقدمة المنتج
A cleanroom air handling unit conditions the large, stable airflow needed to control temperature, humidity, pressure cascade and particle transport. The casing uses flush cleanable inner panels, sealed access doors, drainable coil sections and corrosion-resistant hardware. Prefilters protect the coil and downstream final filters, while direct-drive fans modulate against filter loading and room-pressure demand. Coil face velocity, condensate drainage and access clearances are selected to prevent water carryover into downstream sections.
الخصائص الرئيسية
Separated prefilter and fine-filter stages protect coils and extend the useful life of downstream final filters.
Sloped stainless-steel drain pans remove condensate from cooling-coil sections without standing water.
Variable-speed direct-drive fans maintain scheduled airflow as filters load and operating modes change.
مخاوف المنتج للعملاء
Particle control depends on the entire supply-air path remaining clean, dry and pressure-stable through changing filter and thermal loads.
Dust accumulates on internal ledges that are difficult to reach during sanitation.Flush inner panels and removable components leave broad surfaces accessible for wipe-down.
Cooling-coil condensate remains in the unit and supports odor or microbial growth.A sloped stainless drain pan and correctly trapped drain evacuate water from the wet section.
Rising filter resistance reduces room air changes and destabilizes pressure.Fan-speed control responds to airflow or static-pressure feedback across the operating filter range.
Air bypasses the final filter because the holding frame is not uniformly sealed.Gasketed filter tracks apply even compression around each selected filter module.
تطبيقات نموذجية
Sterile pharmaceutical manufacturingBiological laboratoriesMedical-device clean assemblySemiconductor support cleanroomsHospital clean treatment areas
المعلمات الفنية
The following ranges describe a typical hygienic double-skin AHU for cleanroom service.
| المواد الأساسية | Closed-cell polyurethane or non-shedding mineral-wool casing insulation |
|---|---|
| سمك اللوحة | 50–60 mm double-skin hygienic panel |
| العرض الفعال | 900–3600 mm nominal unit width |
| الحد الأقصى الطول | Up to 11000 mm with gasketed modular sections |
| الصلب يواجه سمك | 0.6–1.0 mm outer skin and 0.8–1.0 mm cleanable inner skin |
| الكثافة الأساسية | 40–44 kg/m³ polyurethane or 82–100 kg/m³ mineral wool |
| الموصلية الحرارية | 0.022–0.038 W/(m·K) for the insulated casing core |
| إنهاء السطح | Powder-coated exterior with smooth galvanized, coated or 304 stainless-steel interior |
| نوع المشترك | Flush gasketed panels on thermal-break frame with sealed filter and access-door interfaces |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
304 or 316L stainless-steel wet-section liningEC fan wall with airflow measurementHeating, cooling and reheat coil combinationsPrefilter, fine-filter and HEPA housing stages
Planning a Cleanroom Air Handling Unit specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
