English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات التدفق والاحتواء الصفائحية
غرفة أخذ العينات وحدات
A panel-built sampling suite that separates incoming containers, personnel access and controlled sampling work within a self-contained warehouse installation.
- Panel-Built Sampling Suite
- Separated Material Access
- Integrated Airflow Zones
- Expandable Modular Layout
مقدمة المنتج
The modular sampling room encloses a complete workflow rather than a single open booth. Insulated cleanroom panels form the sampling space, while personnel and material doors can be arranged to avoid crossing routes. A filtered supply and return system maintains the selected room pressure and can include a local downflow station over the active sampling table. The panel system allows future extension or relocation without masonry construction.
الخصائص الرئيسية
A local downflow zone can be integrated within the larger clean room.
Flush wall and ceiling joints create cleanable internal surfaces.
Service panels group electrical, airflow and monitoring connections outside the work area.
Modular wall bays permit controlled expansion as sampling capacity grows.
مخاوف المنتج للعملاء
A full sampling workflow needs orderly movement of people and containers, not just localized dust capture at one table.
Personnel and raw-material routes cross at one doorway.Dedicated doors separate gowning access from container entry.
Only the active sampling point requires strong local capture.A downflow work zone is integrated inside the larger controlled room.
Warehouse construction changes interrupt operations.Prefabricated panels install with limited wet building work.
Future capacity requires another sampling bay.Modular wall and ceiling sections can extend the suite layout.
تطبيقات نموذجية
Incoming pharmaceutical materialsFood-ingredient samplingCosmetic raw-material checksControlled warehouse quality sampling
المعلمات الفنية
Typical configurable construction ranges for a modular raw-material sampling room are listed below.
| المواد الأساسية | Mineral-wool or polyurethane cleanroom panels with powder-coated steel faces and SUS304 internal work-zone liners |
|---|---|
| سمك اللوحة | 50-100 mm wall and ceiling panels |
| العرض الفعال | 2500-6000 mm clear room width |
| الحد الأقصى الطول | Up to 12000 mm modular room length |
| الصلب يواجه سمك | 0.6-1.0 mm coated panel faces; 1.0-1.2 mm SUS304 local liners |
| الكثافة الأساسية | 80-120 kg/m³ mineral wool or 38-45 kg/m³ polyurethane |
| الموصلية الحرارية | 0.035-0.045 W/(m·K) mineral wool or 0.022-0.028 W/(m·K) polyurethane |
| إنهاء السطح | Low-sheen white cleanroom coating with brushed stainless work-zone surfaces |
| نوع المشترك | Flush sealed tongue-and-groove panels with coved internal bases and gasketed access doors |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Personnel and material airlocksIntegrated downflow boothPass-through sample hatchPressure display and room controls
Planning a Modular Sampling Room specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
