English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات إزالة التلوث للموظفين والمواد
بخار بيروكسيد الهيدروجين تمرير مربع
An airtight material chamber that connects to an integrated or remote VHP process for conditioned exposure and aeration.
- Airtight Treatment Chamber
- VHP Distribution Loop
- Controlled Aeration Stage
- Monitored Door Seals
مقدمة المنتج
The VHP pass box provides a sealed route for compatible material entering critical areas. A generator conditions the chamber, introduces vapour and circulates it around the arranged payload for a defined programme; an aeration stage then removes residual vapour before receiving-side access. Continuous-weld stainless construction, compression or inflatable seals and dedicated ports support a controlled process envelope.
الخصائص الرئيسية
Injection, return and sampling ports support the connected process package.
Catalytic aeration can reduce residual peroxide after exposure.
Seal and chamber-monitoring points support closed-door cycle control.
Shelves can be arranged to improve circulation around compatible loads.
مخاوف المنتج للعملاء
VHP transfer requires an airtight chamber, vapour access around the load and aeration before receiving-side release.
Dense loads create poorly exposed areas behind containers.Forced recirculation and load-spacing shelves promote access around the payload.
A leaky door prevents stable chamber conditions.Compression or inflatable seals can be monitored before the process starts.
Residual vapour delays access after treatment.A controlled catalytic aeration stage clears the chamber before release.
Cold payloads increase condensation risk.The connected process can condition temperature and humidity before injection.
تطبيقات نموذجية
Sterile component entryIsolator support transferCell and gene therapy suitesAseptic laboratory supplies
المعلمات الفنية
Typical airtight construction ranges for a VHP material pass box are listed below.
| المواد الأساسية | Welded SUS 316L chamber with VHP ports, recirculation fan, aeration connection and monitored door seals |
|---|---|
| سمك اللوحة | 80-150 mm airtight double-wall and service-plenum construction |
| العرض الفعال | 500-1200 mm usable chamber width |
| الحد الأقصى الطول | Up to 1800 mm treatment-chamber depth |
| الصلب يواجه سمك | 1.2-2.0 mm SUS 316L chamber facing |
| الكثافة الأساسية | 35-40 kg/m³ polyurethane insulation in the external service envelope |
| الموصلية الحرارية | 0.022-0.028 W/(m·K) for polyurethane service-envelope insulation |
| إنهاء السطح | Electropolished or fine-brushed SUS 316L with coved welds and peroxide-compatible seals |
| نوع المشترك | Continuously welded chamber with compression or inflatable sealed interlocked doors and sanitary VHP ports |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Integrated or remote VHP generatorInflatable door gasketsCatalytic aeration moduleChamber sampling ports
Planning a Vaporized Hydrogen Peroxide Pass Box specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
