English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
مرشحات الهواء والترشيح الكيميائي
مرشح جيب متوسط الكفاءة
An extended-surface pocket filter that distributes air through multiple tapered bags for low resistance and high dust capacity.
- Extended Pocket Area
- Stable Tapered Bags
- High Dust Capacity
- Galvanized Header Frame
مقدمة المنتج
The medium-efficiency pocket filter divides glass-fiber or synthetic media into multiple tapered pockets secured to a rigid galvanized header. Internal stitching, spacers or aerodynamic pocket geometry prevent adjacent pockets from collapsing together, allowing the full media surface to remain active. The long pockets store dust through their depth and lower the media velocity compared with a flat panel of the same face size. A sealed pocket-to-header connection prevents bypass where the flexible media enters the mounting frame.
الخصائص الرئيسية
Tapered geometry and internal stabilizers promote uniform inflation from top to bottom.
A galvanized header provides a rigid sealing surface for front- or side-access filter housings.
Sealed seams and pocket roots keep collected dust from bypassing the active media.
مخاوف المنتج للعملاء
Bag filters need even pocket inflation and unobstructed downstream space to use their full area without abrasion or high pressure drop.
Adjacent pockets collapse together and leave most of the media area inactive.Tapered bags with internal stabilizers maintain separation and balanced airflow between pockets.
Long pockets rub a downstream coil or access door and wear through.The selected pocket depth is matched to the clear housing space and installed airflow direction.
Dust bypasses through poorly sealed pocket roots at the header.Continuous adhesive and mechanically secured pocket attachment close the transition into the metal frame.
Uneven inlet velocity overloads the center bags while outer pockets remain clean.Adequate upstream spacing and a uniform filter-bank face velocity distribute air across every pocket.
تطبيقات نموذجية
Cleanroom HVAC preparatory filtrationCommercial and hospital air handlersPharmaceutical support-area supply airIndustrial process make-up airProtection for terminal HEPA filters
المعلمات الفنية
Typical construction ranges for a medium-efficiency extended-surface pocket filter are listed below.
| المواد الأساسية | Glass-fiber or tear-resistant synthetic pocket media with internal stabilizing seams |
|---|---|
| سمك اللوحة | 25 mm nominal galvanized header-frame depth |
| العرض الفعال | 287-592 mm modular face width |
| الحد الأقصى الطول | 360-635 mm pocket depth in the airflow direction |
| الصلب يواجه سمك | 0.70-1.00 mm galvanized header and pocket-retaining channels |
| الكثافة الأساسية | Approximately 30-60 kg/m³ nominal pocket-media bulk density |
| الموصلية الحرارية | Approximately 0.035-0.045 W/(m·K) for the dry fiber medium |
| إنهاء السطح | White glass fiber or color-coded synthetic pockets with mill-galvanized header |
| نوع المشترك | Individually stitched pockets sealed and mechanically locked into a common galvanized header frame |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
ISO ePM10, ePM2.5 or ePM1 gradesThree to ten pockets360 mm to 635 mm pocket depthGalvanized, plastic or incinerable header
Planning a Medium-Efficiency Pocket Filter specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
