English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات إزالة التلوث للموظفين والمواد
Cargo غرف الأبحاث دش الهواء
A reinforced material-transfer air shower that removes loose surface dust from carts, palletised loads and production equipment before clean-area entry.
- Wide Cargo Passage
- Side and Top Cleaning
- Flush Wheeled Route
- Heavy-Duty Returns
مقدمة المنتج
The cargo air shower is sized around material handling rather than a stationary operator. Sidewall jets, and optional roof jets, direct filtered air across trolley frames, cartons and equipment surfaces. A level reinforced floor supports wheeled transfer, while guarded low-level returns and larger prefilters accommodate the heavier fibres and warehouse dust commonly carried by incoming materials.
الخصائص الرئيسية
Side and roof nozzle zones can clean vertical faces and upper load surfaces.
Lower impact protection guards returns from routine trolley contact.
Large-area prefilters are suited to coarse packaging fibres.
Large interlocked doors preserve the transfer boundary during the cleaning cycle.
مخاوف المنتج للعملاء
Material loads vary in height, shape and wheel loading, so the chamber must clean exposed surfaces without obstructing the transfer route.
Tall loads leave their upper surfaces outside sidewall airflow.Optional roof nozzles direct filtered air downward across load tops.
Raised thresholds impede pallet-jack movement.A flush reinforced floor maintains a smooth wheeled path.
Cart impacts damage exposed return grilles.Kick plates and protected inlet faces shield the low-level return sections.
Packaging debris clogs small personnel-air-shower filters.Expanded washable prefilter banks offer greater coarse-dust collection area.
تطبيقات نموذجية
Pharmaceutical material transferFood ingredient cart entryElectronics equipment move-inPackaging component decontamination
المعلمات الفنية
Typical structural ranges for a cart and equipment cargo air shower are given below.
| المواد الأساسية | Reinforced mineral-wool insulated steel enclosure with multi-side nozzle plenums, washable prefilters and H13 HEPA banks |
|---|---|
| سمك اللوحة | 50-75 mm impact-reinforced wall and roof panels |
| العرض الفعال | 1500-2500 mm clear cargo passage width |
| الحد الأقصى الطول | Up to 6000 mm modular cargo cleaning length |
| الصلب يواجه سمك | 1.2-1.5 mm steel facing with heavier stainless kick plates |
| الكثافة الأساسية | 80-120 kg/m³ mineral-wool enclosure core |
| الموصلية الحرارية | 0.036-0.045 W/(m·K) for the mineral-wool panel construction |
| إنهاء السطح | Powder-coated upper panels with brushed stainless lower impact protection |
| نوع المشترك | Bolted heavy-duty modular frame with flush floor joints and electrically interlocked cargo doors |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Swing, sliding or roll-up cargo doorsSide-plus-ceiling nozzle arrangementWheel guides and bumper railsPallet-jack or powered-cart clearances
Planning a Cargo Cleanroom Air Shower specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
