English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
مرشحات الهواء والترشيح الكيميائي
مرشح ULPA صغير
A shallow ultra-low-penetration air filter with densely spaced microglass mini-pleats for very high particle capture in semiconductor and precision cleanrooms.
- U15–U16 Media Options
- Dense Mini-Pleat Pack
- Shallow Aluminium Frame
- Uniform Terminal Airflow
مقدمة المنتج
The mini-pleat ULPA filter uses ultra-fine glass-microfibre media folded into a high-area pack with narrow thermoplastic separators. Precise pleat spacing allows the panel to achieve U15 or U16 class options while remaining shallow enough for cleanroom ceilings and fan filter units. The pack is fully potted into an anodized-aluminium frame, protected by expanded-metal grids and completed with gasket, gel or knife-edge sealing. Its high filtration class and even face velocity suit semiconductor, optics and other ultra-clean manufacturing zones.
الخصائص الرئيسية
Uniform thermoplastic separators keep narrow airflow channels open across the whole media pack.
An anodized-aluminium frame and sealed corners provide a clean, rigid perimeter for ceiling installation.
Open protective grids shield the delicate ULPA media while preserving even downstream air distribution.
مخاوف المنتج للعملاء
Ultra-clean processes require filtration beyond normal HEPA classes while maintaining manageable resistance and uniform terminal airflow.
A conventional HEPA filter does not provide the selected U-class particle retention.Ultra-fine microglass media and controlled mini-pleat manufacturing support U15 or U16 configurations.
Very dense media causes uneven velocity across a large terminal face.Precisely spaced pleat channels distribute air through the full filter area instead of concentrating flow paths.
The delicate high-efficiency pack is easily damaged during FFU installation.Protective grids and a rigid extruded-aluminium perimeter shield the pack from handling contact.
A deep filter reduces usable service space above the cleanroom ceiling.The high-area mini-pleat pack fits within common 80–150 mm shallow terminal frames.
تطبيقات نموذجية
Semiconductor wafer fabricationPrecision optics manufacturingFlat-panel display cleanroomsHard-disk media productionUltra-clean metrology laboratories
المعلمات الفنية
Representative construction ranges for mini-pleat ULPA panels are shown below.
| المواد الأساسية | Low-penetration glass-microfibre ULPA media with precisely spaced thermoplastic mini-pleat separators |
|---|---|
| سمك اللوحة | 80–150 mm overall frame depth |
| العرض الفعال | 305-610 مم عرض الوجه الاسمي |
| الحد الأقصى الطول | ما يصل إلى 1220 مم طول الوجه الاسمي |
| الصلب يواجه سمك | 0.4–0.6 mm powder-coated or stainless-steel expanded faceguard |
| الكثافة الأساسية | Approximately 35–55 kg/m³ equivalent mini-pleat media density |
| الموصلية الحرارية | Approximately 0.035–0.045 W/(m·K) for the dry microglass ULPA pack |
| إنهاء السطح | Natural anodized-aluminium frame with clean white or stainless faceguards |
| نوع المشترك | EPDM gasket, polyurethane gel channel or extruded knife-edge perimeter |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
U15 or U16 efficiency class80 mm, 90 mm or 150 mm frame depthGasket, gel or knife-edge sealOne-sided or two-sided faceguard
Planning a Mini-Pleat ULPA Filter specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
