English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات إزالة التلوث للموظفين والمواد
شخص واحد غرف نظيفة هواء دش
A compact, interlocked chamber that removes loose particles from one gowned operator with directional recirculated filtered air before clean-side access.
- One-Person Footprint
- Directional Garment Jets
- Interlocked Door Sequence
- Low-Level Particle Return
مقدمة المنتج
This cleanroom air shower provides a controlled transition between a gowning room and a clean area. After entry, the door sequence holds the passage closed while sidewall nozzles direct filtered air across the operator; released lint is collected through lower return grilles before the air is recirculated. Its compact straight-through layout is intended for single-file personnel traffic where entrance space is limited.
الخصائص الرئيسية
Adjustable nozzle rows can be aimed at sleeves, torso and lower garments.
Lower return grilles draw released particles downward rather than allowing them to settle on footwear.
A timed controller coordinates the cleaning period and the door-release sequence.
Smooth internal panels allow routine wipe-down of the occupied chamber surfaces.
مخاوف المنتج للعملاء
A single-occupant entry needs repeatable garment cleaning without consuming valuable gowning-room space or creating confusing door operation.
Sleeves and trouser legs receive little cleaning when air is supplied at one height.Multi-level adjustable sidewall nozzles can cover upper and lower garment areas.
Premature clean-side opening can disturb the controlled boundary.The interlock keeps the exit secured until the programmed cycle has ended.
A large entrance unit crowds a compact gowning room.The blower, filtration path and returns are integrated within a slim self-contained enclosure.
Released particles can circulate around the operator.Low-wall return openings collect the particle-laden airflow close to the floor.
تطبيقات نموذجية
Pharmaceutical gowning entrancesMedical-device assembly roomsElectronics cleanroom transitionsLaboratory controlled-area access
المعلمات الفنية
Typical construction ranges for a compact one-person air shower are listed below.
| المواد الأساسية | Polyurethane-insulated powder-coated steel enclosure with stainless nozzle plates, prefilter and H13 HEPA recirculation stage |
|---|---|
| سمك اللوحة | 50 mm insulated enclosure panels |
| العرض الفعال | 800-900 mm clear internal passage width |
| الحد الأقصى الطول | Up to 1200 mm chamber length |
| الصلب يواجه سمك | 1.0-1.2 mm formed steel sheet |
| الكثافة الأساسية | 38-45 kg/m³ closed-cell polyurethane insulation |
| الموصلية الحرارية | 0.022-0.028 W/(m·K) for the insulated panel core |
| إنهاء السطح | White epoxy-polyester powder coating with smooth sealed inner surfaces |
| نوع المشترك | Gasketed panel seams with electromagnetically interlocked entrance and exit door frames |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
SUS 304 internal liner12-18 directional nozzlesProgrammable cleaning cycleLeft-hand or right-hand door swing
Planning a Single-Person Cleanroom Air Shower specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
