Three-quarter view of a static stainless-steel cleanroom pass box

معدات إزالة التلوث للموظفين والمواد

صندوق تمرير غرف الأبحاث

A non-ventilated stainless transfer cabinet that separates two rooms through sealed, interlocked doors.

Non-Ventilated Transfer Chamber
Dual-Door Interlock
Smooth Lipless Interior
Compression Door Seals

مقدمة المنتج

The static pass box creates an enclosed material route through a cleanroom partition without its own fan or filter. Its double-wall stainless body conceals the interlock outside the payload space, and the flush internal chamber can be wiped without ledges. This simple configuration is suited to short transfers between compatible clean areas.

الخصائص الرئيسية

The concealed interlock is protected from impact by trays and cartons.

A lipless sill supports smooth, obstruction-free transfer.

Compression latches draw the door against a continuous perimeter gasket.

A glazed panel permits visual confirmation before access.

Mechanical or electrical one-door-at-a-time operation can be selected.

مخاوف المنتج للعملاء

A passive pass box must preserve the wall opening and prevent direct room-to-room exposure.

A direct hatch lets air and particles pass between rooms.Two sealed doors create an intermediate transfer volume.

Exposed hardware collects dirt and is damaged by loads.The interlock is isolated behind the double-wall chamber.

Raised sills snag cartons and retain debris.A flush lipless transfer surface removes the ledge.

Door gaskets seal unevenly around the perimeter.Compression latches apply repeatable closure force along the door edge.

تطبيقات نموذجية

Pharmaceutical packaging transferMedical-device componentsElectronics cleanroomsLaboratory sample movement

المعلمات الفنية

Typical construction ranges for a static wall-mounted pass box are listed below.

المواد الأساسية	Double-wall SUS 304 cabinet with polyurethane-insulated service void, glazed doors and silicone seals
سمك اللوحة	50-80 mm double-wall cabinet construction
العرض الفعال	400-1000 mm clear transfer width
الحد الأقصى الطول	Up to 1200 mm chamber depth
الصلب يواجه سمك	1.0-1.5 mm stainless-steel facing
الكثافة الأساسية	35-40 kg/m³ polyurethane service-void insulation
الموصلية الحرارية	0.022-0.028 W/(m·K) for polyurethane double-wall infill
إنهاء السطح	Brushed SUS 304 with smooth flush interior seams and optional electropolished chamber
نوع المشترك	Sealed folded or welded body with mechanically or electrically interlocked compression doors
التخصيص	متوفر على أساس التطبيق المقصود وبيئة التشغيل.

الخيارات المتاحة

Mechanical or electronic interlockSUS 304 or SUS 316L bodyOpaque or glazed doorsWall-thickness trim frame

Planning a Static Cleanroom Pass Box specification?

أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.

تحدث مع فريقنا