English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أنظمة الجدار والسقف للغرفة النظيفة
المغنيسيوم أوكسيسبريتات لوحة غرف الأبحاث
A dense inorganic-core cleanroom panel made with magnesium oxysulfate material between coated steel facings, offering a firm wall or ceiling surface for hygienic areas exposed to regular cleaning and controlled humidity.
- Dense Inorganic Core
- Moisture-Stable Composition
- Firm Panel Surface
- Tongue-and-Groove Assembly
مقدمة المنتج
The Magnesium Oxysulfate Cleanroom Panel uses a cured, chloride-free magnesium cement core between smooth coated-steel skins. Its dense inorganic structure produces a firm panel with good dimensional stability and resistance to ordinary cleanroom humidity. The outer facings provide the wipeable surface, while formed tongue-and-groove edges align adjacent modules and receive hygienic sealant. Closed perimeter profiles protect the core during transport and prevent cleaning liquid from reaching internal material at the panel ends. The construction is well suited to controlled areas that need a robust mineral panel without exposed fibres or a lightweight polymer-foam center.
الخصائص الرئيسية
A dense cured core gives walls a solid feel and resists local compression during normal handling.
Low water absorption helps the core maintain shape during routine humid service.
Smooth coated-steel facings prevent direct exposure of the inorganic core to cleaning agents.
Machined tongue-and-groove edges speed alignment across continuous wall and ceiling runs.
مخاوف المنتج للعملاء
Customers commonly compare moisture stability, panel weight, edge durability and surface cleaning performance.
Some magnesium boards absorb moisture and lose dimensional stability.Magnesium oxysulfate chemistry and sealed metal facings limit moisture uptake during normal service.
Dense inorganic panels can be chipped at exposed corners during transport.Protected perimeter profiles and rigid packaging shield vulnerable edges until installation.
Heavy modules are harder to position accurately at full room height.Controlled panel sizes and planned lifting points keep installation safe and joints aligned.
Rough mineral surfaces are unsuitable for frequent cleanroom wiping.Continuous coated-steel skins create the non-porous surface seen by the controlled room.
تطبيقات نموذجية
Pharmaceutical preparation roomsFood and beverage clean processing areasMedical-device production spacesLaboratories and hospital support roomsHumid controlled-environment partitions
المعلمات الفنية
Typical production specifications for the magnesium oxysulfate panel are shown below.
| المواد الأساسية | Magnesium oxysulfate inorganic composite |
|---|---|
| سمك اللوحة | 50, 75, 100 or 120 mm |
| العرض الفعال | 950 or 1150 mm |
| الحد الأقصى الطول | 6000 mm |
| الصلب يواجه سمك | 0.426–0.80 mm |
| الكثافة الأساسية | Approximately 220 kg/m³ |
| الموصلية الحرارية | Approximately 0.038 W/(m·K) |
| إنهاء السطح | PE-, HDP- or PVDF-coated galvanized steel |
| نوع المشترك | Machine-formed tongue-and-groove connection |
| التخصيص | متاح بناءً على التطبيق المقصود وبيئة التشغيل |
الخيارات المتاحة
Alternative steel coatingStainless steel facingWall or ceiling edge profileCustom module length and cut-outs
Planning a Magnesium Oxysulfate Cleanroom Panel specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
