Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Equipamentos de drenagem, higiene e segurança da sala limpa
Z Wall-Mounted Eyewash (em inglês)
A compact wall-supported twin-nozzle eyewash that preserves floor clearance while providing immediate hands-free flushing.
- Space-Saving Wall Mount
- Twin Protected Nozzles
- Stay-Open Push Control
- Stainless Receptor Option
Introdução do produto
The wall-mounted eyewash places the receptor, twin flushing heads and activation valve on a rigid bracket, leaving the floor beneath clear for cleaning and circulation. A large push flag opens a stay-open valve, while flow controls and an inlet strainer stabilize the two streams. Supply and waste connections can pass directly through the wall or remain accessible beneath the receptor according to the service layout.
Características-chave
Twin covered heads deliver simultaneous controlled flushing streams.
A stay-open valve leaves both hands free after one-motion activation.
Stainless and chemical-resistant receptor options suit different cleaning chemistries.
Preocupações do produto do cliente
Small laboratories need an unobstructed emergency flush point without sacrificing activation clarity or service access.
A pedestal unit obstructs narrow aisles and complicates floor cleaning.The load-bearing wall bracket keeps the complete eyewash above the floor.
Emergency users need to operate the station while vision is impaired.A large safety-colored push flag provides a simple tactile activation point.
Water pressure variation can make one nozzle stream stronger than the other.Matched flow controls regulate both heads from the common filtered inlet.
Visible piping can conflict with a clean wall finish.Rear-entry supply and waste routing can conceal services within the technical wall zone.
Aplicações típicas
Cleanroom laboratoriesChemical sampling roomsResearch wet benchesCompact utility alcoves
Parâmetros técnicos
Typical dimensions and materials for a wall-mounted plumbed eyewash are listed below; final wall reinforcement and emergency-water supply are coordinated with the room services.
| Material principal | 304 stainless receptor and bracket with chrome-plated brass valve components |
|---|---|
| Painel de espessura | 1.0-1.5 mm stainless receptor |
| Largura efetiva | 280-400 mm |
| Comprimento máximo | Up to 500 mm projection from wall |
| Aço enfrentando espessura | 1.0-2.0 mm stainless bowl and mounting bracket |
| Densidade Core | 7900 - 8000 kg / m3 para peças estruturais inoxidáveis |
| Condutividade térmica | 14 - 16 W / (m · K) para componentes inoxidáveis |
| Superfície acabado | Bright or satin stainless with safety-green activation components |
| Tipo conjunto | Bolted wall bracket with threaded inlet, waste and stay-open valve connections |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Rear or bottom service entryStainless or polymer receptorFlow-switch alarm contactAssembléia de mistura de água temperada
Planning a Wall-Mounted Eyewash specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
