İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Drenajı, Hijyen ve Güvenlik Ekipmanları
Duvar montajlı göz yıkayı
A compact wall-supported twin-nozzle eyewash that preserves floor clearance while providing immediate hands-free flushing.
- Space-Saving Wall Mount
- Twin Protected Nozzles
- Stay-Open Push Control
- Stainless Receptor Option
Ürün tanıtımı
The wall-mounted eyewash places the receptor, twin flushing heads and activation valve on a rigid bracket, leaving the floor beneath clear for cleaning and circulation. A large push flag opens a stay-open valve, while flow controls and an inlet strainer stabilize the two streams. Supply and waste connections can pass directly through the wall or remain accessible beneath the receptor according to the service layout.
Ana Özellikler
Twin covered heads deliver simultaneous controlled flushing streams.
A stay-open valve leaves both hands free after one-motion activation.
Stainless and chemical-resistant receptor options suit different cleaning chemistries.
Müşteri Ürün Sorunları
Small laboratories need an unobstructed emergency flush point without sacrificing activation clarity or service access.
A pedestal unit obstructs narrow aisles and complicates floor cleaning.The load-bearing wall bracket keeps the complete eyewash above the floor.
Emergency users need to operate the station while vision is impaired.A large safety-colored push flag provides a simple tactile activation point.
Water pressure variation can make one nozzle stream stronger than the other.Matched flow controls regulate both heads from the common filtered inlet.
Visible piping can conflict with a clean wall finish.Rear-entry supply and waste routing can conceal services within the technical wall zone.
Tipik uygulamalar
Cleanroom laboratoriesChemical sampling roomsResearch wet benchesCompact utility alcoves
Teknik parametreler
Typical dimensions and materials for a wall-mounted plumbed eyewash are listed below; final wall reinforcement and emergency-water supply are coordinated with the room services.
| Temel malzemeler | 304 stainless receptor and bracket with chrome-plated brass valve components |
|---|---|
| Panel kalınlığı | 1.0-1.5 mm stainless receptor |
| Effective Width (Etkili Genişlik) | 280-400 mm |
| Maksimum uzunluk | Up to 500 mm projection from wall |
| Çelik yüz yüze kalınlığı | 1.0-2.0 mm stainless bowl and mounting bracket |
| Core Density (Çekirdek Yoğunluğu) | Paslanmaz yapısal parçalar için 7900-8000 kg / m3 |
| Termal İletkenlik | Paslanmaz bileşenler için 14-16 W / (m · K) |
| Yüzey bitirme | Bright or satin stainless with safety-green activation components |
| Ortak tip | Bolted wall bracket with threaded inlet, waste and stay-open valve connections |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Rear or bottom service entryStainless or polymer receptorFlow-switch alarm contactTempered Water Mixing Assembly (Tempered Su Karıştırma Montajı)
Planning a Wall-Mounted Eyewash specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
