Complete wall-mounted eyewash in three-quarter view with twin protected heads and stainless receptor

Cleanroom Drainage, Peralatan Kebersihan dan Keselamatan

Dinding-Mounted Eyewash

A compact wall-supported twin-nozzle eyewash that preserves floor clearance while providing immediate hands-free flushing.

Space-Saving Wall Mount
Twin Protected Nozzles
Stay-Open Push Control
Stainless Receptor Option

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The wall-mounted eyewash places the receptor, twin flushing heads and activation valve on a rigid bracket, leaving the floor beneath clear for cleaning and circulation. A large push flag opens a stay-open valve, while flow controls and an inlet strainer stabilize the two streams. Supply and waste connections can pass directly through the wall or remain accessible beneath the receptor according to the service layout.

Fitur utama:

Wall support keeps the emergency station off the floor and reduces its installed footprint.

Twin covered heads deliver simultaneous controlled flushing streams.

A stay-open valve leaves both hands free after one-motion activation.

Stainless and chemical-resistant receptor options suit different cleaning chemistries.

Kekhawatiran produk pelanggan

Small laboratories need an unobstructed emergency flush point without sacrificing activation clarity or service access.

A pedestal unit obstructs narrow aisles and complicates floor cleaning.The load-bearing wall bracket keeps the complete eyewash above the floor.

Emergency users need to operate the station while vision is impaired.A large safety-colored push flag provides a simple tactile activation point.

Water pressure variation can make one nozzle stream stronger than the other.Matched flow controls regulate both heads from the common filtered inlet.

Visible piping can conflict with a clean wall finish.Rear-entry supply and waste routing can conceal services within the technical wall zone.

Aplikasi yang Tipis

Cleanroom laboratoriesChemical sampling roomsResearch wet benchesCompact utility alcoves

Parameter teknis

Typical dimensions and materials for a wall-mounted plumbed eyewash are listed below; final wall reinforcement and emergency-water supply are coordinated with the room services.

Bahan inti	304 stainless receptor and bracket with chrome-plated brass valve components
Ketebalan Panel (Panel Thickness)	1.0-1.5 mm stainless receptor
Efektif lebar	280-400 mm
Panjang maksimum	Up to 500 mm projection from wall
Baja menghadap ketebalan	1.0-2.0 mm stainless bowl and mounting bracket
Kepadatan inti (core density)	7900-8000 kg/m³ for stainless structural parts
Konduktivitas Termal (Thermal Conductivity)	14 - 16 W / (m · K) untuk komponen stainless
Permukaan selesai	Bright or satin stainless with safety-green activation components
Jenis Bersama	Bolted wall bracket with threaded inlet, waste and stay-open valve connections
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Rear or bottom service entryStainless or polymer receptorFlow-switch alarm contactTempered-water mixing assembly

Planning a Wall-Mounted Eyewash specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami