Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Drenaje de sala limpia, equipos de higiene y seguridad
Wall-Mount Eyewash
A compact wall-supported twin-nozzle eyewash that preserves floor clearance while providing immediate hands-free flushing.
- Space-Saving Wall Mount
- Twin Protected Nozzles
- Stay-Open Push Control
- Stainless Receptor Option
Introducción del producto
The wall-mounted eyewash places the receptor, twin flushing heads and activation valve on a rigid bracket, leaving the floor beneath clear for cleaning and circulation. A large push flag opens a stay-open valve, while flow controls and an inlet strainer stabilize the two streams. Supply and waste connections can pass directly through the wall or remain accessible beneath the receptor according to the service layout.
Características clave
Twin covered heads deliver simultaneous controlled flushing streams.
A stay-open valve leaves both hands free after one-motion activation.
Stainless and chemical-resistant receptor options suit different cleaning chemistries.
Preocupaciones del producto del cliente
Small laboratories need an unobstructed emergency flush point without sacrificing activation clarity or service access.
A pedestal unit obstructs narrow aisles and complicates floor cleaning.The load-bearing wall bracket keeps the complete eyewash above the floor.
Emergency users need to operate the station while vision is impaired.A large safety-colored push flag provides a simple tactile activation point.
Water pressure variation can make one nozzle stream stronger than the other.Matched flow controls regulate both heads from the common filtered inlet.
Visible piping can conflict with a clean wall finish.Rear-entry supply and waste routing can conceal services within the technical wall zone.
Aplicaciones típicas
Cleanroom laboratoriesChemical sampling roomsResearch wet benchesCompact utility alcoves
Parámetros técnicos
Typical dimensions and materials for a wall-mounted plumbed eyewash are listed below; final wall reinforcement and emergency-water supply are coordinated with the room services.
| Materiales Core | 304 stainless receptor and bracket with chrome-plated brass valve components |
|---|---|
| Panel de espesor | 1.0-1.5 mm stainless receptor |
| Ancho efectivo | 280-400 mm |
| Longitud máxima | Up to 500 mm projection from wall |
| Acero frente a espesor | 1.0-2.0 mm stainless bowl and mounting bracket |
| Densidad Core | 7900 - 8000 kg / m3 para piezas estructurales inoxidables |
| Conductividad térmica | 14 - 16 W / (m · K) para componentes inoxidables por |
| Superficie acabada | Bright or satin stainless with safety-green activation components |
| Tipo conjunto | Bolted wall bracket with threaded inlet, waste and stay-open valve connections |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Rear or bottom service entryStainless or polymer receptorFlow-switch alarm contactTempered-water mixing assembly
Planning a Wall-Mounted Eyewash specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
