English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Дренажное оборудование, оборудование для гигиены и безопасности в чистых помещениях
Настенный глазный мышь
A compact wall-supported twin-nozzle eyewash that preserves floor clearance while providing immediate hands-free flushing.
- Space-Saving Wall Mount
- Twin Protected Nozzles
- Stay-Open Push Control
- Stainless Receptor Option
Введение продукции
The wall-mounted eyewash places the receptor, twin flushing heads and activation valve on a rigid bracket, leaving the floor beneath clear for cleaning and circulation. A large push flag opens a stay-open valve, while flow controls and an inlet strainer stabilize the two streams. Supply and waste connections can pass directly through the wall or remain accessible beneath the receptor according to the service layout.
Основные характеристики
Twin covered heads deliver simultaneous controlled flushing streams.
A stay-open valve leaves both hands free after one-motion activation.
Stainless and chemical-resistant receptor options suit different cleaning chemistries.
Обеспокоенность клиентов продуктами
Small laboratories need an unobstructed emergency flush point without sacrificing activation clarity or service access.
A pedestal unit obstructs narrow aisles and complicates floor cleaning.The load-bearing wall bracket keeps the complete eyewash above the floor.
Emergency users need to operate the station while vision is impaired.A large safety-colored push flag provides a simple tactile activation point.
Water pressure variation can make one nozzle stream stronger than the other.Matched flow controls regulate both heads from the common filtered inlet.
Visible piping can conflict with a clean wall finish.Rear-entry supply and waste routing can conceal services within the technical wall zone.
Типичные приложения
Cleanroom laboratoriesChemical sampling roomsResearch wet benchesCompact utility alcoves
Технические параметры
Typical dimensions and materials for a wall-mounted plumbed eyewash are listed below; final wall reinforcement and emergency-water supply are coordinated with the room services.
| Основной материал | 304 stainless receptor and bracket with chrome-plated brass valve components |
|---|---|
| Толщина панели | 1.0-1.5 mm stainless receptor |
| эффективная ширина | 280-400 mm |
| Максимальная длина | Up to 500 mm projection from wall |
| Толщина линий стали | 1.0-2.0 mm stainless bowl and mounting bracket |
| Плотность ядра | 7900 - 8000 кг / м3 для нержавеющих конструктивных деталей |
| Теплопроводимость | 14 - 16 Вт / (м · К) для нержавеющих компонентов |
| Поверхностная отделка | Bright or satin stainless with safety-green activation components |
| Объединенный тип | Bolted wall bracket with threaded inlet, waste and stay-open valve connections |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Rear or bottom service entryStainless or polymer receptorFlow-switch alarm contactУстановка для смешивания закаленной воды
Planning a Wall-Mounted Eyewash specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
