Complete wall-mounted eyewash in three-quarter view with twin protected heads and stainless receptor

クリーンルーム排水 · 衛生 · 安全設備

ウォールマウントアイウォッシュ

A compact wall-supported twin-nozzle eyewash that preserves floor clearance while providing immediate hands-free flushing.

Space-Saving Wall Mount
Twin Protected Nozzles
Stay-Open Push Control
Stainless Receptor Option

見積もりリクエスト製品案内

商品紹介

The wall-mounted eyewash places the receptor, twin flushing heads and activation valve on a rigid bracket, leaving the floor beneath clear for cleaning and circulation. A large push flag opens a stay-open valve, while flow controls and an inlet strainer stabilize the two streams. Supply and waste connections can pass directly through the wall or remain accessible beneath the receptor according to the service layout.

主要な特徴

Wall support keeps the emergency station off the floor and reduces its installed footprint.

Twin covered heads deliver simultaneous controlled flushing streams.

A stay-open valve leaves both hands free after one-motion activation.

Stainless and chemical-resistant receptor options suit different cleaning chemistries.

お客様の製品に関する懸念事項

Small laboratories need an unobstructed emergency flush point without sacrificing activation clarity or service access.

A pedestal unit obstructs narrow aisles and complicates floor cleaning.The load-bearing wall bracket keeps the complete eyewash above the floor.

Emergency users need to operate the station while vision is impaired.A large safety-colored push flag provides a simple tactile activation point.

Water pressure variation can make one nozzle stream stronger than the other.Matched flow controls regulate both heads from the common filtered inlet.

Visible piping can conflict with a clean wall finish.Rear-entry supply and waste routing can conceal services within the technical wall zone.

典型的な用途

Cleanroom laboratoriesChemical sampling roomsResearch wet benchesCompact utility alcoves

技術的なパラメータ

Typical dimensions and materials for a wall-mounted plumbed eyewash are listed below; final wall reinforcement and emergency-water supply are coordinated with the room services.

コア材料	304 stainless receptor and bracket with chrome-plated brass valve components
パネルの厚さ	1.0-1.5 mm stainless receptor
有効幅	280-400 mm
最大長さ	Up to 500 mm projection from wall
鋼鉄の厚さを直面する	1.0-2.0 mm stainless bowl and mounting bracket
コア密度	7900-8000 kg/m³ for stainless structural parts
熱伝導率	14-16 W/(m·K) for stainless components
表面仕上げ	Bright or satin stainless with safety-green activation components
ジョイントタイプ	Bolted wall bracket with threaded inlet, waste and stay-open valve connections
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Rear or bottom service entryStainless or polymer receptorFlow-switch alarm contactTempered-water mixing assembly

Planning a Wall-Mounted Eyewash specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する