English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات الصرف الصحي والنظافة والسلامة في الغرف النظيفة
غسل العيون المثبتة على الحائط
A compact wall-supported twin-nozzle eyewash that preserves floor clearance while providing immediate hands-free flushing.
- Space-Saving Wall Mount
- Twin Protected Nozzles
- Stay-Open Push Control
- Stainless Receptor Option
مقدمة المنتج
The wall-mounted eyewash places the receptor, twin flushing heads and activation valve on a rigid bracket, leaving the floor beneath clear for cleaning and circulation. A large push flag opens a stay-open valve, while flow controls and an inlet strainer stabilize the two streams. Supply and waste connections can pass directly through the wall or remain accessible beneath the receptor according to the service layout.
الخصائص الرئيسية
Twin covered heads deliver simultaneous controlled flushing streams.
A stay-open valve leaves both hands free after one-motion activation.
Stainless and chemical-resistant receptor options suit different cleaning chemistries.
مخاوف المنتج للعملاء
Small laboratories need an unobstructed emergency flush point without sacrificing activation clarity or service access.
A pedestal unit obstructs narrow aisles and complicates floor cleaning.The load-bearing wall bracket keeps the complete eyewash above the floor.
Emergency users need to operate the station while vision is impaired.A large safety-colored push flag provides a simple tactile activation point.
Water pressure variation can make one nozzle stream stronger than the other.Matched flow controls regulate both heads from the common filtered inlet.
Visible piping can conflict with a clean wall finish.Rear-entry supply and waste routing can conceal services within the technical wall zone.
تطبيقات نموذجية
Cleanroom laboratoriesChemical sampling roomsResearch wet benchesCompact utility alcoves
المعلمات الفنية
Typical dimensions and materials for a wall-mounted plumbed eyewash are listed below; final wall reinforcement and emergency-water supply are coordinated with the room services.
| المواد الأساسية | 304 stainless receptor and bracket with chrome-plated brass valve components |
|---|---|
| سمك اللوحة | 1.0-1.5 mm stainless receptor |
| العرض الفعال | 280-400 mm |
| الحد الأقصى الطول | Up to 500 mm projection from wall |
| الصلب يواجه سمك | 1.0-2.0 mm stainless bowl and mounting bracket |
| الكثافة الأساسية | 7900-8000 kg/m³ for stainless structural parts |
| الموصلية الحرارية | 14-16 W/(m·K) for stainless components |
| إنهاء السطح | Bright or satin stainless with safety-green activation components |
| نوع المشترك | Bolted wall bracket with threaded inlet, waste and stay-open valve connections |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Rear or bottom service entryStainless or polymer receptorFlow-switch alarm contactTempered-water mixing assembly
Planning a Wall-Mounted Eyewash specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
