Complete wall-mounted eyewash in three-quarter view with twin protected heads and stainless receptor

Peralatan Saliran Bilik Bersih, Kebersihan dan Keselamatan

Basuh mata yang dipasang di dinding

A compact wall-supported twin-nozzle eyewash that preserves floor clearance while providing immediate hands-free flushing.

Space-Saving Wall Mount
Twin Protected Nozzles
Stay-Open Push Control
Stainless Receptor Option

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The wall-mounted eyewash places the receptor, twin flushing heads and activation valve on a rigid bracket, leaving the floor beneath clear for cleaning and circulation. A large push flag opens a stay-open valve, while flow controls and an inlet strainer stabilize the two streams. Supply and waste connections can pass directly through the wall or remain accessible beneath the receptor according to the service layout.

Ciri-ciri Utama

Wall support keeps the emergency station off the floor and reduces its installed footprint.

Twin covered heads deliver simultaneous controlled flushing streams.

A stay-open valve leaves both hands free after one-motion activation.

Stainless and chemical-resistant receptor options suit different cleaning chemistries.

Kebimbangan Produk Pelanggan

Small laboratories need an unobstructed emergency flush point without sacrificing activation clarity or service access.

A pedestal unit obstructs narrow aisles and complicates floor cleaning.The load-bearing wall bracket keeps the complete eyewash above the floor.

Emergency users need to operate the station while vision is impaired.A large safety-colored push flag provides a simple tactile activation point.

Water pressure variation can make one nozzle stream stronger than the other.Matched flow controls regulate both heads from the common filtered inlet.

Visible piping can conflict with a clean wall finish.Rear-entry supply and waste routing can conceal services within the technical wall zone.

Permohonan yang biasa

Cleanroom laboratoriesChemical sampling roomsResearch wet benchesCompact utility alcoves

Parameter teknikal

Typical dimensions and materials for a wall-mounted plumbed eyewash are listed below; final wall reinforcement and emergency-water supply are coordinated with the room services.

Bahan Teras	304 stainless receptor and bracket with chrome-plated brass valve components
Ketebalan Panel	1.0-1.5 mm stainless receptor
Lebar berkesan	280-400 mm
Panjang maksimum	Up to 500 mm projection from wall
Keluli Menghadapi Ketebalan	1.0-2.0 mm stainless bowl and mounting bracket
Ketumpatan teras	7900-8000 kg / m3 untuk bahagian struktur tahan karat
Kekonduksian Terma	14-16 W / (m · K) untuk komponen tahan karat
Kemasan permukaan	Bright or satin stainless with safety-green activation components
Jenis Bersatu	Bolted wall bracket with threaded inlet, waste and stay-open valve connections
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Rear or bottom service entryStainless or polymer receptorFlow-switch alarm contactPerhimpunan pencampuran air tempered

Planning a Wall-Mounted Eyewash specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami