Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Reinraum Drainage, Hygiene und Sicherheitsgeräte
Wall-Mounted Eyewash
A compact wall-supported twin-nozzle eyewash that preserves floor clearance while providing immediate hands-free flushing.
- Space-Saving Wall Mount
- Twin Protected Nozzles
- Stay-Open Push Control
- Stainless Receptor Option
Produkteinführung
The wall-mounted eyewash places the receptor, twin flushing heads and activation valve on a rigid bracket, leaving the floor beneath clear for cleaning and circulation. A large push flag opens a stay-open valve, while flow controls and an inlet strainer stabilize the two streams. Supply and waste connections can pass directly through the wall or remain accessible beneath the receptor according to the service layout.
Key Features
Twin covered heads deliver simultaneous controlled flushing streams.
A stay-open valve leaves both hands free after one-motion activation.
Stainless and chemical-resistant receptor options suit different cleaning chemistries.
Kunden Produktbedenken
Small laboratories need an unobstructed emergency flush point without sacrificing activation clarity or service access.
A pedestal unit obstructs narrow aisles and complicates floor cleaning.The load-bearing wall bracket keeps the complete eyewash above the floor.
Emergency users need to operate the station while vision is impaired.A large safety-colored push flag provides a simple tactile activation point.
Water pressure variation can make one nozzle stream stronger than the other.Matched flow controls regulate both heads from the common filtered inlet.
Visible piping can conflict with a clean wall finish.Rear-entry supply and waste routing can conceal services within the technical wall zone.
Typische Anwendungen
Cleanroom laboratoriesChemical sampling roomsResearch wet benchesCompact utility alcoves
Technische Parameter
Typical dimensions and materials for a wall-mounted plumbed eyewash are listed below; final wall reinforcement and emergency-water supply are coordinated with the room services.
| Core Material | 304 stainless receptor and bracket with chrome-plated brass valve components |
|---|---|
| Panel Dicke | 1.0-1.5 mm stainless receptor |
| Effektive Breite | 280-400 mm |
| Maximale Länge | Up to 500 mm projection from wall |
| Stahl facing Dicke | 1.0-2.0 mm stainless bowl and mounting bracket |
| Kerndichte | 7900 - 8000 kg / m3 für rostfreie Bauteile |
| Thermische Leitfähigkeit | 14 - 16 W / (m · K) für rostfreie Bauteile |
| Oberfläche Finish | Bright or satin stainless with safety-green activation components |
| Gemeinsamer Typ | Bolted wall bracket with threaded inlet, waste and stay-open valve connections |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Rear or bottom service entryStainless or polymer receptorFlow-switch alarm contactTempered-Wasser - Mischversammlung
Planning a Wall-Mounted Eyewash specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
