Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Iluminação de sala limpa e equipamentos elétricos
Luz germicida UV
A fixed UV-C surface-treatment luminaire with a polished reflector and protected control circuit for scheduled unoccupied-room operation.
- Short-Wave UV-C Source
- Polished Directional Reflector
- Interlock-Ready Circuit
- Visible Operating Indicator
Introdução do produto
The fixed germicidal luminaire mounts to a wall or ceiling and directs UV-C energy toward the defined treatment surface. Low-pressure UV lamps or suitable emitters sit within a corrosion-resistant reflector, while the ballast and terminals are enclosed behind a separate cover. The control connection can accept door, occupancy or remote timer signals so exposure is limited to the intended operating sequence.
Características-chave
The electrical chamber shields the ballast and terminals from the exposed lamp area.
A remote-enable input supports door, occupancy and timer control architecture.
A distinct status indicator makes an active treatment cycle visible.
Tool-retained lamp guards reduce accidental contact during servicing.
Preocupações do produto do cliente
UV-C is useful only when dose, line of sight, material compatibility and safeguards are considered together for the specific installation.
Shadowed surfaces receive much less direct irradiation.Reflector orientation and multiple mounting positions are planned around the actual geometry.
A conventional light switch can energize the fixture while people are present.Dedicated interlock and remote-enable inputs separate treatment control from room lighting.
UV exposure degrades unprotected polymers and seals.UV-resistant adjacent materials and controlled cycle duration reduce unnecessary exposure.
Operators cannot distinguish standby from active treatment.A separate visible warning indicator confirms when the UV-C circuit is energized.
Aplicações típicas
Unoccupied cleanroom surface treatmentPass-through interior treatmentAir-handling irradiation sectionsLaboratory room cycles
Parâmetros técnicos
Typical configurable construction ranges for a fixed UV-C germicidal luminaire are listed below.
| Material principal | Stainless or coated-steel electrical body with polished aluminum reflector, UV-C lamp and protected ballast |
|---|---|
| Painel de espessura | 70-160 mm complete reflector and housing depth |
| Largura efetiva | 120-350 mm reflector width |
| Comprimento máximo | Up to 1500 mm complete luminaire length |
| Aço enfrentando espessura | 0.8-1.2 mm stainless or coated-steel electrical enclosure |
| Densidade Core | Approximately 2700 kg/m³ for the aluminum reflector |
| Condutividade térmica | 160-205 W/(m·K) for the aluminum reflector body |
| Superfície acabado | Bright polished aluminum reflector with white or brushed stainless electrical housing |
| Tipo conjunto | Tool-retained lamp guards with gasketed electrical compartment and hardwired interlock terminals |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Open direct or louver-shielded reflectorWall, ceiling or duct mountingRemote timer and door interlock inputSingle- or twin-lamp body
Planning a UV Germicidal Light specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
