Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Iluminación de sala limpia y equipos eléctricos
Luz germicida UV
A fixed UV-C surface-treatment luminaire with a polished reflector and protected control circuit for scheduled unoccupied-room operation.
- Short-Wave UV-C Source
- Polished Directional Reflector
- Interlock-Ready Circuit
- Visible Operating Indicator
Introducción del producto
The fixed germicidal luminaire mounts to a wall or ceiling and directs UV-C energy toward the defined treatment surface. Low-pressure UV lamps or suitable emitters sit within a corrosion-resistant reflector, while the ballast and terminals are enclosed behind a separate cover. The control connection can accept door, occupancy or remote timer signals so exposure is limited to the intended operating sequence.
Características clave
The electrical chamber shields the ballast and terminals from the exposed lamp area.
A remote-enable input supports door, occupancy and timer control architecture.
A distinct status indicator makes an active treatment cycle visible.
Tool-retained lamp guards reduce accidental contact during servicing.
Preocupaciones del producto del cliente
UV-C is useful only when dose, line of sight, material compatibility and safeguards are considered together for the specific installation.
Shadowed surfaces receive much less direct irradiation.Reflector orientation and multiple mounting positions are planned around the actual geometry.
A conventional light switch can energize the fixture while people are present.Dedicated interlock and remote-enable inputs separate treatment control from room lighting.
UV exposure degrades unprotected polymers and seals.UV-resistant adjacent materials and controlled cycle duration reduce unnecessary exposure.
Operators cannot distinguish standby from active treatment.A separate visible warning indicator confirms when the UV-C circuit is energized.
Aplicaciones típicas
Unoccupied cleanroom surface treatmentPass-through interior treatmentAir-handling irradiation sectionsLaboratory room cycles
Parámetros técnicos
Typical configurable construction ranges for a fixed UV-C germicidal luminaire are listed below.
| Materiales Core | Stainless or coated-steel electrical body with polished aluminum reflector, UV-C lamp and protected ballast |
|---|---|
| Panel de espesor | 70-160 mm complete reflector and housing depth |
| Ancho efectivo | 120-350 mm reflector width |
| Longitud máxima | Up to 1500 mm complete luminaire length |
| Acero frente a espesor | 0.8-1.2 mm stainless or coated-steel electrical enclosure |
| Densidad Core | Approximately 2700 kg/m³ for the aluminum reflector |
| Conductividad térmica | 160-205 W/(m·K) for the aluminum reflector body |
| Superficie acabada | Bright polished aluminum reflector with white or brushed stainless electrical housing |
| Tipo conjunto | Tool-retained lamp guards with gasketed electrical compartment and hardwired interlock terminals |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Open direct or louver-shielded reflectorWall, ceiling or duct mountingRemote timer and door interlock inputSingle- or twin-lamp body
Planning a UV Germicidal Light specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
