Fixed UV-C germicidal luminaire with polished reflector and protected lamp

クリーンルーム照明 · 電気機器

紫外線殺菌ライト

A fixed UV-C surface-treatment luminaire with a polished reflector and protected control circuit for scheduled unoccupied-room operation.

Short-Wave UV-C Source
Polished Directional Reflector
Interlock-Ready Circuit
Visible Operating Indicator

見積もりリクエスト製品案内

商品紹介

The fixed germicidal luminaire mounts to a wall or ceiling and directs UV-C energy toward the defined treatment surface. Low-pressure UV lamps or suitable emitters sit within a corrosion-resistant reflector, while the ballast and terminals are enclosed behind a separate cover. The control connection can accept door, occupancy or remote timer signals so exposure is limited to the intended operating sequence.

主要な特徴

A polished aluminum reflector directs output toward the selected treatment zone.

The electrical chamber shields the ballast and terminals from the exposed lamp area.

A remote-enable input supports door, occupancy and timer control architecture.

A distinct status indicator makes an active treatment cycle visible.

Tool-retained lamp guards reduce accidental contact during servicing.

お客様の製品に関する懸念事項

UV-C is useful only when dose, line of sight, material compatibility and safeguards are considered together for the specific installation.

Shadowed surfaces receive much less direct irradiation.Reflector orientation and multiple mounting positions are planned around the actual geometry.

A conventional light switch can energize the fixture while people are present.Dedicated interlock and remote-enable inputs separate treatment control from room lighting.

UV exposure degrades unprotected polymers and seals.UV-resistant adjacent materials and controlled cycle duration reduce unnecessary exposure.

Operators cannot distinguish standby from active treatment.A separate visible warning indicator confirms when the UV-C circuit is energized.

典型的な用途

Unoccupied cleanroom surface treatmentPass-through interior treatmentAir-handling irradiation sectionsLaboratory room cycles

技術的なパラメータ

Typical configurable construction ranges for a fixed UV-C germicidal luminaire are listed below.

コア材料	Stainless or coated-steel electrical body with polished aluminum reflector, UV-C lamp and protected ballast
パネルの厚さ	70-160 mm complete reflector and housing depth
有効幅	120-350 mm reflector width
最大長さ	Up to 1500 mm complete luminaire length
鋼鉄の厚さを直面する	0.8-1.2 mm stainless or coated-steel electrical enclosure
コア密度	Approximately 2700 kg/m³ for the aluminum reflector
熱伝導率	160-205 W/(m·K) for the aluminum reflector body
表面仕上げ	Bright polished aluminum reflector with white or brushed stainless electrical housing
ジョイントタイプ	Tool-retained lamp guards with gasketed electrical compartment and hardwired interlock terminals
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Open direct or louver-shielded reflectorWall, ceiling or duct mountingRemote timer and door interlock inputSingle- or twin-lamp body

Planning a UV Germicidal Light specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する