Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Reinraum Beleuchtung und elektrische Ausrüstung
UV germicides Licht
A fixed UV-C surface-treatment luminaire with a polished reflector and protected control circuit for scheduled unoccupied-room operation.
- Short-Wave UV-C Source
- Polished Directional Reflector
- Interlock-Ready Circuit
- Visible Operating Indicator
Produkteinführung
The fixed germicidal luminaire mounts to a wall or ceiling and directs UV-C energy toward the defined treatment surface. Low-pressure UV lamps or suitable emitters sit within a corrosion-resistant reflector, while the ballast and terminals are enclosed behind a separate cover. The control connection can accept door, occupancy or remote timer signals so exposure is limited to the intended operating sequence.
Key Features
The electrical chamber shields the ballast and terminals from the exposed lamp area.
A remote-enable input supports door, occupancy and timer control architecture.
A distinct status indicator makes an active treatment cycle visible.
Tool-retained lamp guards reduce accidental contact during servicing.
Kunden Produktbedenken
UV-C is useful only when dose, line of sight, material compatibility and safeguards are considered together for the specific installation.
Shadowed surfaces receive much less direct irradiation.Reflector orientation and multiple mounting positions are planned around the actual geometry.
A conventional light switch can energize the fixture while people are present.Dedicated interlock and remote-enable inputs separate treatment control from room lighting.
UV exposure degrades unprotected polymers and seals.UV-resistant adjacent materials and controlled cycle duration reduce unnecessary exposure.
Operators cannot distinguish standby from active treatment.A separate visible warning indicator confirms when the UV-C circuit is energized.
Typische Anwendungen
Unoccupied cleanroom surface treatmentPass-through interior treatmentAir-handling irradiation sectionsLaboratory room cycles
Technische Parameter
Typical configurable construction ranges for a fixed UV-C germicidal luminaire are listed below.
| Core Material | Stainless or coated-steel electrical body with polished aluminum reflector, UV-C lamp and protected ballast |
|---|---|
| Panel Dicke | 70-160 mm complete reflector and housing depth |
| Effektive Breite | 120-350 mm reflector width |
| Maximale Länge | Up to 1500 mm complete luminaire length |
| Stahl facing Dicke | 0.8-1.2 mm stainless or coated-steel electrical enclosure |
| Kerndichte | Approximately 2700 kg/m³ for the aluminum reflector |
| Thermische Leitfähigkeit | 160-205 W/(m·K) for the aluminum reflector body |
| Oberfläche Finish | Bright polished aluminum reflector with white or brushed stainless electrical housing |
| Gemeinsamer Typ | Tool-retained lamp guards with gasketed electrical compartment and hardwired interlock terminals |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Open direct or louver-shielded reflectorWall, ceiling or duct mountingRemote timer and door interlock inputSingle- or twin-lamp body
Planning a UV Germicidal Light specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
