Fixed UV-C germicidal luminaire with polished reflector and protected lamp

Освещение и электрическое оборудование в чистых помещениях

УФ-гермицидный свет

A fixed UV-C surface-treatment luminaire with a polished reflector and protected control circuit for scheduled unoccupied-room operation.

Short-Wave UV-C Source
Polished Directional Reflector
Interlock-Ready Circuit
Visible Operating Indicator

Запрос котировки Просмотреть продукты

Введение продукции

The fixed germicidal luminaire mounts to a wall or ceiling and directs UV-C energy toward the defined treatment surface. Low-pressure UV lamps or suitable emitters sit within a corrosion-resistant reflector, while the ballast and terminals are enclosed behind a separate cover. The control connection can accept door, occupancy or remote timer signals so exposure is limited to the intended operating sequence.

Основные характеристики

A polished aluminum reflector directs output toward the selected treatment zone.

The electrical chamber shields the ballast and terminals from the exposed lamp area.

A remote-enable input supports door, occupancy and timer control architecture.

A distinct status indicator makes an active treatment cycle visible.

Tool-retained lamp guards reduce accidental contact during servicing.

Обеспокоенность клиентов продуктами

UV-C is useful only when dose, line of sight, material compatibility and safeguards are considered together for the specific installation.

Shadowed surfaces receive much less direct irradiation.Reflector orientation and multiple mounting positions are planned around the actual geometry.

A conventional light switch can energize the fixture while people are present.Dedicated interlock and remote-enable inputs separate treatment control from room lighting.

UV exposure degrades unprotected polymers and seals.UV-resistant adjacent materials and controlled cycle duration reduce unnecessary exposure.

Operators cannot distinguish standby from active treatment.A separate visible warning indicator confirms when the UV-C circuit is energized.

Типичные приложения

Unoccupied cleanroom surface treatmentPass-through interior treatmentAir-handling irradiation sectionsLaboratory room cycles

Технические параметры

Typical configurable construction ranges for a fixed UV-C germicidal luminaire are listed below.

Основной материал	Stainless or coated-steel electrical body with polished aluminum reflector, UV-C lamp and protected ballast
Толщина панели	70-160 mm complete reflector and housing depth
эффективная ширина	120-350 mm reflector width
Максимальная длина	Up to 1500 mm complete luminaire length
Толщина линий стали	0.8-1.2 mm stainless or coated-steel electrical enclosure
Плотность ядра	Approximately 2700 kg/m³ for the aluminum reflector
Теплопроводимость	160-205 W/(m·K) for the aluminum reflector body
Поверхностная отделка	Bright polished aluminum reflector with white or brushed stainless electrical housing
Объединенный тип	Tool-retained lamp guards with gasketed electrical compartment and hardwired interlock terminals
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

Open direct or louver-shielded reflectorWall, ceiling or duct mountingRemote timer and door interlock inputSingle- or twin-lamp body

Planning a UV Germicidal Light specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой