Fixed UV-C germicidal luminaire with polished reflector and protected lamp

클린룸 조명 및 전기 장비

UV 살균광

A fixed UV-C surface-treatment luminaire with a polished reflector and protected control circuit for scheduled unoccupied-room operation.

Short-Wave UV-C Source
Polished Directional Reflector
Interlock-Ready Circuit
Visible Operating Indicator

견적 요청 제품 찾아보기

상품 소개

The fixed germicidal luminaire mounts to a wall or ceiling and directs UV-C energy toward the defined treatment surface. Low-pressure UV lamps or suitable emitters sit within a corrosion-resistant reflector, while the ballast and terminals are enclosed behind a separate cover. The control connection can accept door, occupancy or remote timer signals so exposure is limited to the intended operating sequence.

주요 기능

A polished aluminum reflector directs output toward the selected treatment zone.

The electrical chamber shields the ballast and terminals from the exposed lamp area.

A remote-enable input supports door, occupancy and timer control architecture.

A distinct status indicator makes an active treatment cycle visible.

Tool-retained lamp guards reduce accidental contact during servicing.

고객 제품 관심사

UV-C is useful only when dose, line of sight, material compatibility and safeguards are considered together for the specific installation.

Shadowed surfaces receive much less direct irradiation.Reflector orientation and multiple mounting positions are planned around the actual geometry.

A conventional light switch can energize the fixture while people are present.Dedicated interlock and remote-enable inputs separate treatment control from room lighting.

UV exposure degrades unprotected polymers and seals.UV-resistant adjacent materials and controlled cycle duration reduce unnecessary exposure.

Operators cannot distinguish standby from active treatment.A separate visible warning indicator confirms when the UV-C circuit is energized.

일반적인 응용 프로그램

Unoccupied cleanroom surface treatmentPass-through interior treatmentAir-handling irradiation sectionsLaboratory room cycles

기술 매개변수

Typical configurable construction ranges for a fixed UV-C germicidal luminaire are listed below.

핵심 재료	Stainless or coated-steel electrical body with polished aluminum reflector, UV-C lamp and protected ballast
패널 두께	70-160 mm complete reflector and housing depth
유효 폭	120-350 mm reflector width
최대 길이	Up to 1500 mm complete luminaire length
강철 면면 두께	0.8-1.2 mm stainless or coated-steel electrical enclosure
코어 밀도	Approximately 2700 kg/m³ for the aluminum reflector
열전도도 (Thermal Conductivity)	160-205 W/(m·K) for the aluminum reflector body
표면 마무리	Bright polished aluminum reflector with white or brushed stainless electrical housing
접합 유형	Tool-retained lamp guards with gasketed electrical compartment and hardwired interlock terminals
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Open direct or louver-shielded reflectorWall, ceiling or duct mountingRemote timer and door interlock inputSingle- or twin-lamp body

Planning a UV Germicidal Light specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.