Fixed UV-C germicidal luminaire with polished reflector and protected lamp

Cleanroom Lighting dan Peralatan Listrik

UV germicidal cahaya

A fixed UV-C surface-treatment luminaire with a polished reflector and protected control circuit for scheduled unoccupied-room operation.

Short-Wave UV-C Source
Polished Directional Reflector
Interlock-Ready Circuit
Visible Operating Indicator

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The fixed germicidal luminaire mounts to a wall or ceiling and directs UV-C energy toward the defined treatment surface. Low-pressure UV lamps or suitable emitters sit within a corrosion-resistant reflector, while the ballast and terminals are enclosed behind a separate cover. The control connection can accept door, occupancy or remote timer signals so exposure is limited to the intended operating sequence.

Fitur utama:

A polished aluminum reflector directs output toward the selected treatment zone.

The electrical chamber shields the ballast and terminals from the exposed lamp area.

A remote-enable input supports door, occupancy and timer control architecture.

A distinct status indicator makes an active treatment cycle visible.

Tool-retained lamp guards reduce accidental contact during servicing.

Kekhawatiran produk pelanggan

UV-C is useful only when dose, line of sight, material compatibility and safeguards are considered together for the specific installation.

Shadowed surfaces receive much less direct irradiation.Reflector orientation and multiple mounting positions are planned around the actual geometry.

A conventional light switch can energize the fixture while people are present.Dedicated interlock and remote-enable inputs separate treatment control from room lighting.

UV exposure degrades unprotected polymers and seals.UV-resistant adjacent materials and controlled cycle duration reduce unnecessary exposure.

Operators cannot distinguish standby from active treatment.A separate visible warning indicator confirms when the UV-C circuit is energized.

Aplikasi yang Tipis

Unoccupied cleanroom surface treatmentPass-through interior treatmentAir-handling irradiation sectionsLaboratory room cycles

Parameter teknis

Typical configurable construction ranges for a fixed UV-C germicidal luminaire are listed below.

Bahan inti	Stainless or coated-steel electrical body with polished aluminum reflector, UV-C lamp and protected ballast
Ketebalan Panel (Panel Thickness)	70-160 mm complete reflector and housing depth
Efektif lebar	120-350 mm reflector width
Panjang maksimum	Up to 1500 mm complete luminaire length
Baja menghadap ketebalan	0.8-1.2 mm stainless or coated-steel electrical enclosure
Kepadatan inti (core density)	Approximately 2700 kg/m³ for the aluminum reflector
Konduktivitas Termal (Thermal Conductivity)	160-205 W/(m·K) for the aluminum reflector body
Permukaan selesai	Bright polished aluminum reflector with white or brushed stainless electrical housing
Jenis Bersama	Tool-retained lamp guards with gasketed electrical compartment and hardwired interlock terminals
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Open direct or louver-shielded reflectorWall, ceiling or duct mountingRemote timer and door interlock inputSingle- or twin-lamp body

Planning a UV Germicidal Light specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami