English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
إضاءة الغرف النظيفة والمعدات الكهربائية
UV مبيد للجراثيم ضوء
A fixed UV-C surface-treatment luminaire with a polished reflector and protected control circuit for scheduled unoccupied-room operation.
- Short-Wave UV-C Source
- Polished Directional Reflector
- Interlock-Ready Circuit
- Visible Operating Indicator
مقدمة المنتج
The fixed germicidal luminaire mounts to a wall or ceiling and directs UV-C energy toward the defined treatment surface. Low-pressure UV lamps or suitable emitters sit within a corrosion-resistant reflector, while the ballast and terminals are enclosed behind a separate cover. The control connection can accept door, occupancy or remote timer signals so exposure is limited to the intended operating sequence.
الخصائص الرئيسية
The electrical chamber shields the ballast and terminals from the exposed lamp area.
A remote-enable input supports door, occupancy and timer control architecture.
A distinct status indicator makes an active treatment cycle visible.
Tool-retained lamp guards reduce accidental contact during servicing.
مخاوف المنتج للعملاء
UV-C is useful only when dose, line of sight, material compatibility and safeguards are considered together for the specific installation.
Shadowed surfaces receive much less direct irradiation.Reflector orientation and multiple mounting positions are planned around the actual geometry.
A conventional light switch can energize the fixture while people are present.Dedicated interlock and remote-enable inputs separate treatment control from room lighting.
UV exposure degrades unprotected polymers and seals.UV-resistant adjacent materials and controlled cycle duration reduce unnecessary exposure.
Operators cannot distinguish standby from active treatment.A separate visible warning indicator confirms when the UV-C circuit is energized.
تطبيقات نموذجية
Unoccupied cleanroom surface treatmentPass-through interior treatmentAir-handling irradiation sectionsLaboratory room cycles
المعلمات الفنية
Typical configurable construction ranges for a fixed UV-C germicidal luminaire are listed below.
| المواد الأساسية | Stainless or coated-steel electrical body with polished aluminum reflector, UV-C lamp and protected ballast |
|---|---|
| سمك اللوحة | 70-160 mm complete reflector and housing depth |
| العرض الفعال | 120-350 mm reflector width |
| الحد الأقصى الطول | Up to 1500 mm complete luminaire length |
| الصلب يواجه سمك | 0.8-1.2 mm stainless or coated-steel electrical enclosure |
| الكثافة الأساسية | Approximately 2700 kg/m³ for the aluminum reflector |
| الموصلية الحرارية | 160-205 W/(m·K) for the aluminum reflector body |
| إنهاء السطح | Bright polished aluminum reflector with white or brushed stainless electrical housing |
| نوع المشترك | Tool-retained lamp guards with gasketed electrical compartment and hardwired interlock terminals |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Open direct or louver-shielded reflectorWall, ceiling or duct mountingRemote timer and door interlock inputSingle- or twin-lamp body
Planning a UV Germicidal Light specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
