Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Éclairage de salle blanche et équipements électriques
Lumière germicide UV
A fixed UV-C surface-treatment luminaire with a polished reflector and protected control circuit for scheduled unoccupied-room operation.
- Short-Wave UV-C Source
- Polished Directional Reflector
- Interlock-Ready Circuit
- Visible Operating Indicator
Introduction de produit
The fixed germicidal luminaire mounts to a wall or ceiling and directs UV-C energy toward the defined treatment surface. Low-pressure UV lamps or suitable emitters sit within a corrosion-resistant reflector, while the ballast and terminals are enclosed behind a separate cover. The control connection can accept door, occupancy or remote timer signals so exposure is limited to the intended operating sequence.
Key Features
The electrical chamber shields the ballast and terminals from the exposed lamp area.
A remote-enable input supports door, occupancy and timer control architecture.
A distinct status indicator makes an active treatment cycle visible.
Tool-retained lamp guards reduce accidental contact during servicing.
Préoccupations du client produit
UV-C is useful only when dose, line of sight, material compatibility and safeguards are considered together for the specific installation.
Shadowed surfaces receive much less direct irradiation.Reflector orientation and multiple mounting positions are planned around the actual geometry.
A conventional light switch can energize the fixture while people are present.Dedicated interlock and remote-enable inputs separate treatment control from room lighting.
UV exposure degrades unprotected polymers and seals.UV-resistant adjacent materials and controlled cycle duration reduce unnecessary exposure.
Operators cannot distinguish standby from active treatment.A separate visible warning indicator confirms when the UV-C circuit is energized.
Les applications typiques
Unoccupied cleanroom surface treatmentPass-through interior treatmentAir-handling irradiation sectionsLaboratory room cycles
Paramètres techniques
Typical configurable construction ranges for a fixed UV-C germicidal luminaire are listed below.
| Matériaux de base | Stainless or coated-steel electrical body with polished aluminum reflector, UV-C lamp and protected ballast |
|---|---|
| Panneau épaisseur | 70-160 mm complete reflector and housing depth |
| Largeur effective | 120-350 mm reflector width |
| Longueur maximale | Up to 1500 mm complete luminaire length |
| Acier face épaisseur | 0.8-1.2 mm stainless or coated-steel electrical enclosure |
| Densité Core | Approximately 2700 kg/m³ for the aluminum reflector |
| Conductivité thermique | 160-205 W/(m·K) for the aluminum reflector body |
| surface finie | Bright polished aluminum reflector with white or brushed stainless electrical housing |
| Type joint | Tool-retained lamp guards with gasketed electrical compartment and hardwired interlock terminals |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Open direct or louver-shielded reflectorWall, ceiling or duct mountingRemote timer and door interlock inputSingle- or twin-lamp body
Planning a UV Germicidal Light specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
