Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Equipamento de descontaminação de pessoal e materiais
Ducheiro de ar limpo em forma de U
A folded 180-degree air shower route that returns the clean-side exit to the same side as the entrance while extending the cleaning path.
- 180-Degree Return Route
- Same-Side Openings
- Extended Air Exposure
- Zoned Corner Returns
Introdução do produto
The U-shaped air shower uses two internal turns to connect both controlled openings to the same face of the enclosure. Directional nozzle zones follow the folded route, while returns at the bends collect dust close to where it is dislodged. This configuration supports facility retrofits where neither a straight nor an L-shaped transfer path can connect the gowning and clean areas.
Características-chave
Successive cleaning zones lengthen exposure without requiring a stationary batch cycle.
Ceiling nozzles can cover garments as operators change orientation at the turns.
Returns at both bends reduce particle accumulation in internal corners.
Zoned fan sections support more even pressure across the two legs.
Preocupações do produto do cliente
A folded route must avoid stagnant corners and prevent the remote cleaning leg from becoming a low-pressure zone.
The two connected rooms are located on the same wall with no straight route.A U-shaped enclosure returns traffic after two controlled turns.
Lint builds up in inner corners when returns are only at the entrance.Dedicated return grilles at both bends collect contamination locally.
Remote nozzle rows lose pressure through a long common plenum.Zoned blower-filter sections supply each leg through shorter duct paths.
Users may be uncertain of the direction through a folded chamber.Sequential indicators can identify entry, cleaning route and clean-side exit.
Aplicações típicas
Same-wall gowning connectionsSpace-constrained retrofitsPharmaceutical corridor reconfigurationControlled laboratory entrances
Parâmetros técnicos
Representative construction ranges for a U-shaped personnel air shower are listed below.
| Material principal | Multi-zone insulated steel enclosure with H13 HEPA fan sections, stainless nozzles and corner return-air plenums |
|---|---|
| Painel de espessura | 50-75 mm modular wall and divider panels |
| Largura efetiva | 900-1500 mm clear width along each U-shaped passage leg |
| Comprimento máximo | Up to 4500 mm overall folded enclosure length |
| Aço enfrentando espessura | 1.2-1.5 mm steel facing at dividers, returns and door frames |
| Densidade Core | 60-90 kg/m³ composite mineral insulation |
| Condutividade térmica | 0.032-0.042 W/(m·K) for the insulated partition construction |
| Superfície acabado | Light-colour cleanroom powder coating with abrasion-resistant corner guards |
| Tipo conjunto | Bolted U-module junctions with sealed divider edges and sequence-controlled door interlocks |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Clockwise or counter-clockwise routeTwo or three cleaning zonesTraffic-direction lightsEmergency release at outer doors
Planning a U-Shaped Cleanroom Air Shower specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
