Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Equipos de descontaminación de personal y material
Ducha de aire limpio en forma de U por
A folded 180-degree air shower route that returns the clean-side exit to the same side as the entrance while extending the cleaning path.
- 180-Degree Return Route
- Same-Side Openings
- Extended Air Exposure
- Zoned Corner Returns
Introducción del producto
The U-shaped air shower uses two internal turns to connect both controlled openings to the same face of the enclosure. Directional nozzle zones follow the folded route, while returns at the bends collect dust close to where it is dislodged. This configuration supports facility retrofits where neither a straight nor an L-shaped transfer path can connect the gowning and clean areas.
Características clave
Successive cleaning zones lengthen exposure without requiring a stationary batch cycle.
Ceiling nozzles can cover garments as operators change orientation at the turns.
Returns at both bends reduce particle accumulation in internal corners.
Zoned fan sections support more even pressure across the two legs.
Preocupaciones del producto del cliente
A folded route must avoid stagnant corners and prevent the remote cleaning leg from becoming a low-pressure zone.
The two connected rooms are located on the same wall with no straight route.A U-shaped enclosure returns traffic after two controlled turns.
Lint builds up in inner corners when returns are only at the entrance.Dedicated return grilles at both bends collect contamination locally.
Remote nozzle rows lose pressure through a long common plenum.Zoned blower-filter sections supply each leg through shorter duct paths.
Users may be uncertain of the direction through a folded chamber.Sequential indicators can identify entry, cleaning route and clean-side exit.
Aplicaciones típicas
Same-wall gowning connectionsSpace-constrained retrofitsPharmaceutical corridor reconfigurationControlled laboratory entrances
Parámetros técnicos
Representative construction ranges for a U-shaped personnel air shower are listed below.
| Materiales Core | Multi-zone insulated steel enclosure with H13 HEPA fan sections, stainless nozzles and corner return-air plenums |
|---|---|
| Panel de espesor | 50-75 mm modular wall and divider panels |
| Ancho efectivo | 900-1500 mm clear width along each U-shaped passage leg |
| Longitud máxima | Up to 4500 mm overall folded enclosure length |
| Acero frente a espesor | 1.2-1.5 mm steel facing at dividers, returns and door frames |
| Densidad Core | 60-90 kg/m³ composite mineral insulation |
| Conductividad térmica | 0.032-0.042 W/(m·K) for the insulated partition construction |
| Superficie acabada | Light-colour cleanroom powder coating with abrasion-resistant corner guards |
| Tipo conjunto | Bolted U-module junctions with sealed divider edges and sequence-controlled door interlocks |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Clockwise or counter-clockwise routeTwo or three cleaning zonesTraffic-direction lightsEmergency release at outer doors
Planning a U-Shaped Cleanroom Air Shower specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
