English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات إزالة التلوث للموظفين والمواد
U على شكل دش الهواء غرف نظيفة
A folded 180-degree air shower route that returns the clean-side exit to the same side as the entrance while extending the cleaning path.
- 180-Degree Return Route
- Same-Side Openings
- Extended Air Exposure
- Zoned Corner Returns
مقدمة المنتج
The U-shaped air shower uses two internal turns to connect both controlled openings to the same face of the enclosure. Directional nozzle zones follow the folded route, while returns at the bends collect dust close to where it is dislodged. This configuration supports facility retrofits where neither a straight nor an L-shaped transfer path can connect the gowning and clean areas.
الخصائص الرئيسية
Successive cleaning zones lengthen exposure without requiring a stationary batch cycle.
Ceiling nozzles can cover garments as operators change orientation at the turns.
Returns at both bends reduce particle accumulation in internal corners.
Zoned fan sections support more even pressure across the two legs.
مخاوف المنتج للعملاء
A folded route must avoid stagnant corners and prevent the remote cleaning leg from becoming a low-pressure zone.
The two connected rooms are located on the same wall with no straight route.A U-shaped enclosure returns traffic after two controlled turns.
Lint builds up in inner corners when returns are only at the entrance.Dedicated return grilles at both bends collect contamination locally.
Remote nozzle rows lose pressure through a long common plenum.Zoned blower-filter sections supply each leg through shorter duct paths.
Users may be uncertain of the direction through a folded chamber.Sequential indicators can identify entry, cleaning route and clean-side exit.
تطبيقات نموذجية
Same-wall gowning connectionsSpace-constrained retrofitsPharmaceutical corridor reconfigurationControlled laboratory entrances
المعلمات الفنية
Representative construction ranges for a U-shaped personnel air shower are listed below.
| المواد الأساسية | Multi-zone insulated steel enclosure with H13 HEPA fan sections, stainless nozzles and corner return-air plenums |
|---|---|
| سمك اللوحة | 50-75 mm modular wall and divider panels |
| العرض الفعال | 900-1500 mm clear width along each U-shaped passage leg |
| الحد الأقصى الطول | Up to 4500 mm overall folded enclosure length |
| الصلب يواجه سمك | 1.2-1.5 mm steel facing at dividers, returns and door frames |
| الكثافة الأساسية | 60-90 kg/m³ composite mineral insulation |
| الموصلية الحرارية | 0.032-0.042 W/(m·K) for the insulated partition construction |
| إنهاء السطح | Light-colour cleanroom powder coating with abrasion-resistant corner guards |
| نوع المشترك | Bolted U-module junctions with sealed divider edges and sequence-controlled door interlocks |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Clockwise or counter-clockwise routeTwo or three cleaning zonesTraffic-direction lightsEmergency release at outer doors
Planning a U-Shaped Cleanroom Air Shower specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
